No fitting or gunsmithing required to get the increased muzzle control and accuracy of Clark's dual-port compensators and match-grade barrel. Comp helps control recoil and muzzle flip for improved accuracy and a faster follow-up shot. Match-grade, button-rifled barrel and pre-fit bushing provide a close fit on most slides for increased accuracy, function and reliability.
SPECS: Steel, blued. Kit includes: 5½" (14cm) barrel, threaded .580"-40 tpi, .45 ACP; blued comp; barrel bushing; .278" c-to-c link and pin. Increases pistol length by 1½" (3.8cm). Fully chambered.
Mehr...
Passt direkt rein & ist bereit zu arbeiten
Kein Anpassen oder Gunsmithing erforderlich, um die verbesserte Mündungssteuerung und Genauigkeit von Clarks Dual-Port-Kompensatoren und Match-Grade-Läufen zu erhalten. Der Kompensator hilft, Rückstoß und Mündungsflip zu kontrollieren, was die Genauigkeit verbessert und einen schnelleren Nachschuss ermöglicht. Der Match-Grade, button-rifled Lauf und das vorgefertigte Bushing sorgen für eine enge Passform auf den meisten Schlitzen, was die Genauigkeit, Funktion und Zuverlässigkeit erhöht.
SPECS: Stahl, blued. Das Kit enthält: 5½" (14cm) Lauf, gewinde .580"-40 tpi, .45 ACP; blued Kompensator; Laufbushing; .278" c-to-c Verbindung und Stift. Erhöht die Pistolengröße um 1½" (3.8cm). Vollständig kammeriert.
Mehr...
Kundenbewertungen zu CLARK CUSTOM .45 Comp Kit
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4,6
Not exactly drop-in, love the kit though(11.08.2010)
I ended up bringing my gun into a local shop, after I installed the compensator and my gun repeatedly jammed. The shop ended up sending it off to Springfield. Two months later my gun is ready,a lighter spring was needed after adding the compensator. My gun is very tight and still has not shot more than 1000 rounds through it so a older pistol might not have the same problem. Picking up a lighter spring might not be a waste of time when getting this.
love it(02.03.2012)
the barrel dropped right in, went together smoothly, I had to use a 2 piece guide rod.
as far as shooting, this thing is amazing. no muzzle rise, less felt recoil. less than a 9mm.
Doesn't need 2 pc. guide rod(01.07.2012)
I've used these comp kits over a dozen times for customers and my own guns and they don't need a guide rod at all. Guide rods cause more problems than than fix. Stick to John Browning's design with a short style guide rod and to disassemble the gun just pull back the slide and remove the slide stop first, then pull the upper half off the lower 1/2 as an assembly. Then it's simple to remove the spring and guide, then pull the barrel forward about an inch, rotate the bushing, remove the spring plug, then the barrel and comp. assembly. So much easier than messing with a guide rod, just ask a gunsmith!
Best 1911 barrel so far.(16.02.2013)
I put this barrel in my Colt 1911 100 years service, and this Clark barrel shoots better than the colts..alot better!.. All my shots are in the bulls eye!.. wow..never thought a barrel could be that accurate..Thanks Clay from Clark Custom Guns..
Better than expected(25.02.2013)
I was looking for a way to customize my SA stainless Loaded/Combat and VERY happy with this kit. The comp looks great on the gun and the accuracy and recoil reduction are amazing. The comp does make assembly a bit troublesome but a good technique solved that problem. I'm only disappointed that I didn't have more rounds to "test" with.
Quality barrel, easy to install.(04.04.2015)
A high quality match barrel and compensator. I installed this on an old worn out race gun that was a home build. Previous barrel and bushing were undersized with a lot of play. The Clark kit dropped right in on a slightly oversized slide (most everything is drop in) everything fit snug with no fitting required and the surface of the barrel is nice and polished and the compensator is just a hair over the diameter of a .45 bullet making it very efficient at mitigating recoil. On a 1911 with tighter tolerances this would most certainly require fitting and a lighter recoil spring will increase the reliability with this barrel but it is a high quality, easy to install upgrade for anyone doing target or competition shooting.
My Drop in Barrel from Clark(03.04.2017)
Barrel dropped right in and no fitting issues. Link was great with the lock up and movement. I choose this with the compensator for a friend who wanted one for competition and is extremely pleased with it and his ability to stay on target. Would buy another when I need another as this, buy with confidence.
Artikel-Nr.: 181165000 CLARK CUSTOM .45 Comp Kit Herstellerproduktnummer: CLK16545 Kein Anpassen oder Gunsmithing erforderlich, um die verbesserte Mündungssteuerung und Genauigkeit von Clarks Dual-Port-Kompensatoren und Match-Grade-Läufen zu erhalten. Der Kompensator hilft, Rückstoß und Mündungsflip zu kontrollieren, was die Genauigkeit verbessert und einen schnelleren Nachschuss ermöglicht. Der Match-Grade, button-rifled Lauf und das vorgefertigte Bushing sorgen für eine enge Passform auf den meisten Schlitzen, was die Genauigkeit, Funktion und Zuverlässigkeit erhöht.
Abgabe nur an Inhaber einer Erwerbserlaubnis.Für den Erwerb dieses Artikels benötigen Sie eine Erwerbsberechtigung. Mehr Informationen
Top Takeaways
Kein Anpassen oder Büchsenmacher erforderlich für bessere Mündungskontrolle und Genauigkeit.
Der Kompensator reduziert Rückstoß und Mündungsflattern für schnellere Folgeschüsse.
Enge Passung mit Match-Grade Lauf und vorgepasster Laufbuchse für erhöhte Zuverlässigkeit.
Eigenschaften
Art:
Drop-In
Finish:
Blued
Gewicht des Laufes:
.42 lbs
Hersteller/Modell:
1911
Lauflänge:
5.5''
Modell:
Government
Patrone:
45 Auto (ACP)
Versandgewicht: 0,159kgVersandhöhe: 8mmVersandbreite: 94mmVersandlänge: 213mm
Artikeldetails
Made in USA
No Export, dieses Produkt ist nur in Deutschland erhältlich.
US-Exportklassifizierung: 0A501.c
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Verbessere deine .45 mit dem CLARK CUSTOM 1911 Drop-In Kompensator Kit! 🎯 Erlebe präzise Schüsse und weniger Rückstoß für schnelle Nachschüsse.
No fitting or gunsmithing required to get the increased muzzle control and accuracy of Clark's dual-port compensators and match-grade barrel. Comp helps control recoil and muzzle flip for improved accuracy and a faster follow-up shot. Match-grade, button-rifled barrel and pre-fit bushing provide a close fit on most slides for increased accuracy, function and reliability.
SPECS: Steel, blued. Kit includes: 5½" (14cm) barrel, threaded .580"-40 tpi, .45 ACP; blued comp; barrel bushing; .278" c-to-c link and pin. Increases pistol length by 1½" (3.8cm). Fully chambered.
Mehr...
Passt direkt rein & ist bereit zu arbeiten
Kein Anpassen oder Gunsmithing erforderlich, um die verbesserte Mündungssteuerung und Genauigkeit von Clarks Dual-Port-Kompensatoren und Match-Grade-Läufen zu erhalten. Der Kompensator hilft, Rückstoß und Mündungsflip zu kontrollieren, was die Genauigkeit verbessert und einen schnelleren Nachschuss ermöglicht. Der Match-Grade, button-rifled Lauf und das vorgefertigte Bushing sorgen für eine enge Passform auf den meisten Schlitzen, was die Genauigkeit, Funktion und Zuverlässigkeit erhöht.
SPECS: Stahl, blued. Das Kit enthält: 5½" (14cm) Lauf, gewinde .580"-40 tpi, .45 ACP; blued Kompensator; Laufbushing; .278" c-to-c Verbindung und Stift. Erhöht die Pistolengröße um 1½" (3.8cm). Vollständig kammeriert.
Mehr...
Kundenbewertungen zu CLARK CUSTOM .45 Comp Kit
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4,6
Not exactly drop-in, love the kit though(11.08.2010)
I ended up bringing my gun into a local shop, after I installed the compensator and my gun repeatedly jammed. The shop ended up sending it off to Springfield. Two months later my gun is ready,a lighter spring was needed after adding the compensator. My gun is very tight and still has not shot more than 1000 rounds through it so a older pistol might not have the same problem. Picking up a lighter spring might not be a waste of time when getting this.
love it(02.03.2012)
the barrel dropped right in, went together smoothly, I had to use a 2 piece guide rod.
as far as shooting, this thing is amazing. no muzzle rise, less felt recoil. less than a 9mm.
Doesn't need 2 pc. guide rod(01.07.2012)
I've used these comp kits over a dozen times for customers and my own guns and they don't need a guide rod at all. Guide rods cause more problems than than fix. Stick to John Browning's design with a short style guide rod and to disassemble the gun just pull back the slide and remove the slide stop first, then pull the upper half off the lower 1/2 as an assembly. Then it's simple to remove the spring and guide, then pull the barrel forward about an inch, rotate the bushing, remove the spring plug, then the barrel and comp. assembly. So much easier than messing with a guide rod, just ask a gunsmith!
Best 1911 barrel so far.(16.02.2013)
I put this barrel in my Colt 1911 100 years service, and this Clark barrel shoots better than the colts..alot better!.. All my shots are in the bulls eye!.. wow..never thought a barrel could be that accurate..Thanks Clay from Clark Custom Guns..
Better than expected(25.02.2013)
I was looking for a way to customize my SA stainless Loaded/Combat and VERY happy with this kit. The comp looks great on the gun and the accuracy and recoil reduction are amazing. The comp does make assembly a bit troublesome but a good technique solved that problem. I'm only disappointed that I didn't have more rounds to "test" with.
Quality barrel, easy to install.(04.04.2015)
A high quality match barrel and compensator. I installed this on an old worn out race gun that was a home build. Previous barrel and bushing were undersized with a lot of play. The Clark kit dropped right in on a slightly oversized slide (most everything is drop in) everything fit snug with no fitting required and the surface of the barrel is nice and polished and the compensator is just a hair over the diameter of a .45 bullet making it very efficient at mitigating recoil. On a 1911 with tighter tolerances this would most certainly require fitting and a lighter recoil spring will increase the reliability with this barrel but it is a high quality, easy to install upgrade for anyone doing target or competition shooting.
My Drop in Barrel from Clark(03.04.2017)
Barrel dropped right in and no fitting issues. Link was great with the lock up and movement. I choose this with the compensator for a friend who wanted one for competition and is extremely pleased with it and his ability to stay on target. Would buy another when I need another as this, buy with confidence.