The Same, Tactical Sling Mount Used By Our Armed Forces
This genuine, Colt factory part is the one used by our GI s on the M-4 carbine to allow attachment of M203 grenade launchers or forward mounted lights and lasers. Steel, two-piece unit clamps directly around the barrel between the barrel bands of the Mil-Spec front sight housing. Can be mounted at the right or left side of weapon and features a rubber-coated swivel to eliminate sling abrasion and noise. No modifications or gunsmithing required. Also fits AR-15/M16 rifles with conventional front sight housing.
Die gleiche, taktische Schlingenaufnahme, die von unseren Streitkräften verwendet wird
Dieses echte Colt Originalteil wird von unseren GI s beim M-4 Karabiner verwendet, um den Anbau von M203 Granatwerfern oder vorderen Leuchten und Lasern zu ermöglichen. Stahl, zweiteilige Einheit, die direkt um den Lauf klemmt, zwischen den Laufbändern des Mil-Spec Visiergehäuses. Kann an der rechten oder linken Seite der Waffe montiert werden und verfügt über eine gummierte Schlingendrehung, um Schlingenabrieb und Geräusche zu vermeiden. Keine Modifikationen oder Büchsenmacherarbeiten erforderlich. Passt auch auf AR-15/M16 Gewehre mit herkömmlichem Visiergehäuse.
SPECS: Schwarz, gehärteter Stahl. 9⁄16" (1,4 cm) lang, 1-11⁄16"(4,3 cm) breit. Passt für Läufe mit einem Durchmesser von .650" (16,5 mm) bis .750" (19,1 mm).
Mehr...
Kundenbewertungen zu COLT Tactical Sling Mount, Front
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,6
FYI: Some assembly required!(11.05.2010)
This is THE best side sling swivel you'll ever find. Although a bit pricier than some kits, this is the real deal.
Be advised, Colt kits do not come assembled. You must have sling rivet installation know-how to attach the sling swivel to the mount. Note that the rivet isn't flared in the picture.
Once assembled, attaching the unit to the barrel is a snap using a pin punch and tap hammer.
These sling points are excellent(21.03.2011)
These sling points are a great addition to a CAR-15. Have used these on military issued M4's and they work. Only reason I did not give this product 5 stars was the price, its Colt so your paying for a name, but this product is worth the money in my opinon.
Great Mount(31.12.2011)
works great. only problem I had was the pins that came with it were way to large. simple fix tho. just bought new pins at the hardware store
Tactical Sling Mount(30.12.2013)
Promag makes one for about half the price; however, it is lower quality. This is the same one I have had on my military M4.
If you have a high end M4, buy this one, if you are putting it on you commercial model, save the money, and buy the Promag version.
Sling now angled correctly(26.04.2014)
My rifle is now comfortable with the sling.
Install the sling mount to the barrel attaching mechanism first.
Expect a slight degradation in accuracy due to barrel harmonics.
This is for working rifles. Not bench rest stuff obviously.
Artikel-Nr.: 160000352 COLT Tactical Sling Mount, Front Herstellerproduktnummer: SPR6106SVL Dieses echte Colt Originalteil wird von unseren GI s beim M-4 Karabiner verwendet, um den Anbau von M203 Granatwerfern oder vorderen Leuchten und Lasern zu ermöglichen. Stahl, zweiteilige Einheit, die direkt um den Lauf klemmt, zwischen den Laufbändern des Mil-Spec Visiergehäuses. Kann an der rechten oder linken Seite der Waffe montiert werden und verfügt über eine gummierte Schlingendrehung, um Schlingenabrieb und Geräusche zu vermeiden. Keine Modifikationen oder Büchsenmacherarbeiten erforderlich. Passt auch auf AR-15/M16 Gewehre mit herkömmlichem Visiergehäuse.
82.9EUR082,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
The Same, Tactical Sling Mount Used By Our Armed Forces
This genuine, Colt factory part is the one used by our GI s on the M-4 carbine to allow attachment of M203 grenade launchers or forward mounted lights and lasers. Steel, two-piece unit clamps directly around the barrel between the barrel bands of the Mil-Spec front sight housing. Can be mounted at the right or left side of weapon and features a rubber-coated swivel to eliminate sling abrasion and noise. No modifications or gunsmithing required. Also fits AR-15/M16 rifles with conventional front sight housing.
Die gleiche, taktische Schlingenaufnahme, die von unseren Streitkräften verwendet wird
Dieses echte Colt Originalteil wird von unseren GI s beim M-4 Karabiner verwendet, um den Anbau von M203 Granatwerfern oder vorderen Leuchten und Lasern zu ermöglichen. Stahl, zweiteilige Einheit, die direkt um den Lauf klemmt, zwischen den Laufbändern des Mil-Spec Visiergehäuses. Kann an der rechten oder linken Seite der Waffe montiert werden und verfügt über eine gummierte Schlingendrehung, um Schlingenabrieb und Geräusche zu vermeiden. Keine Modifikationen oder Büchsenmacherarbeiten erforderlich. Passt auch auf AR-15/M16 Gewehre mit herkömmlichem Visiergehäuse.
SPECS: Schwarz, gehärteter Stahl. 9⁄16" (1,4 cm) lang, 1-11⁄16"(4,3 cm) breit. Passt für Läufe mit einem Durchmesser von .650" (16,5 mm) bis .750" (19,1 mm).
Mehr...
Kundenbewertungen zu COLT Tactical Sling Mount, Front
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,6
FYI: Some assembly required!(11.05.2010)
This is THE best side sling swivel you'll ever find. Although a bit pricier than some kits, this is the real deal.
Be advised, Colt kits do not come assembled. You must have sling rivet installation know-how to attach the sling swivel to the mount. Note that the rivet isn't flared in the picture.
Once assembled, attaching the unit to the barrel is a snap using a pin punch and tap hammer.
These sling points are excellent(21.03.2011)
These sling points are a great addition to a CAR-15. Have used these on military issued M4's and they work. Only reason I did not give this product 5 stars was the price, its Colt so your paying for a name, but this product is worth the money in my opinon.
Great Mount(31.12.2011)
works great. only problem I had was the pins that came with it were way to large. simple fix tho. just bought new pins at the hardware store
Tactical Sling Mount(30.12.2013)
Promag makes one for about half the price; however, it is lower quality. This is the same one I have had on my military M4.
If you have a high end M4, buy this one, if you are putting it on you commercial model, save the money, and buy the Promag version.
Sling now angled correctly(26.04.2014)
My rifle is now comfortable with the sling.
Install the sling mount to the barrel attaching mechanism first.
Expect a slight degradation in accuracy due to barrel harmonics.
This is for working rifles. Not bench rest stuff obviously.