EGW Savage 10-16 Round Back Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Mehr...
EGW Savage 10-16 Round Back Short Action Scope Bases. Erweitere die Vielseitigkeit deines Gewehrs mit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Slot-und-Schienenabstand, der schnelle und einfache Änderungen des Augenabstands ermöglicht, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Gehäuse des Gewehrs zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrmontagen. Leichte Tactical Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus ultra-steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauen Loctite zur Montage.
Mehr...
Kundenbewertungen zu EGW Savage 10-16 Round Back Short Action 0 MOA
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4
Savage 10TR EGW 20 moa rail(05.04.2016)
Dropped right on to my Savage 10 TR holes lined up and everything!
a little problem(21.08.2010)
I had a customer who purchased a new savage 10 in .308, with an accutrigger. Of course mounting a good scope system was in order. The customer was on a budget and picked this mount to use. In short, the tollerances on the holes were way off. So far off that i couldnt get the all the screws in at all.The finish is great but the holes were way off. I ended up getting a much better mount.
Perfict fit and function.(24.02.2012)
I ordered this mount to replace the 3 sided mount that came with my Savage Model 10-BASK. This mount was an absolute perfect fit and came with the shorter screws for a complete installation. Make sure you follow the instructions and use GREEN loctite for the install and torque it to the 20 inch pounds specified in the instructions. You won't be disappointed!
Great mount(30.10.2016)
As a F Class shooter it has to work every time without fail. The base was easy to install on and looks great. Next time I need a scope base i will buy a EGW. They make great stuff.
Artikel-Nr.: 296000091 EGW Savage 10-16 Round Back Short Action 0 MOA Herstellerproduktnummer: 41000841370105366 EGW Savage 10-16 Round Back Short Action Scope Bases. Erweitere die Vielseitigkeit deines Gewehrs mit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Slot-und-Schienenabstand, der schnelle und einfache Änderungen des Augenabstands ermöglicht, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Gehäuse des Gewehrs zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrmontagen. Leichte Tactical Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus ultra-steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauen Loctite zur Montage.
Präzisionsgefertigte einteilige Picatinny-Schiene aus 6061 T6 Aluminium, passend für Savage 10-16 Round Back Short Action Gewehre.
Ermöglicht schnelle und einfache Änderungen des Augenabstands und bietet große Flexibilität bei der Wahl des Zielfernrohrs.
Inklusive Innensechskant Torx® Schrauben und Schlüssel, empfohlenes Drehmoment: 20 inch lbs mit einem Tropfen blauen Loctite.
Eigenschaften
Art:
Picatinny Rail
Basenanzahl:
1-Piece
Farbe:
Black
Hersteller/Modell:
Savage Arms
Material:
Aluminum
Modell:
Universal,10,11,12,14,16,Universal Rifles
Versandgewicht: 0,113kgVersandhöhe: 18mmVersandbreite: 81mmVersandlänge: 206mm
Artikeldetails
Made in USA
Artikel-Nr.: 296000212 EGW Savage 10-16 Round Rear Short Action 20 MOA Herstellerproduktnummer: 41002841370105373 EGW Savage 10-16 Round Back Short Action Scope Bases. Erweitere die Vielseitigkeit deines Gewehrs mit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Slot-und-Schienenabstand, der schnelle und einfache Änderungen des Augenabstands ermöglicht, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Gehäuse des Gewehrs zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrmontagen. Leichte Tactical Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus ultra-steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauen Loctite zur Montage.
Einteilige Picatinny-Schiene aus extrudiertem 6061 T6 Aluminium, passend für Savage 10-16 Modelle, ohne Bohren oder Gewindeschneiden.
Schnelle und einfache Änderungen des Augenabstands dank präzisionsgefertigter Picatinny-Schiene mit MIL-STD 1913 Spezifikationen.
Inklusive Innensechskant Torx® Schrauben und Schlüssel; empfohlenes Drehmoment: 20 inch lbs, mit einem Tropfen blauen Loctite.
Eigenschaften
Art:
Picatinny Rail
Basenanzahl:
1-Piece
Farbe:
Black
Hersteller/Modell:
Savage Arms
Material:
Aluminum
Modell:
10,11,12,14,16
Versandgewicht: 0,068kgVersandhöhe: 20mmVersandbreite: 89mmVersandlänge: 229mm
Artikeldetails
Made in USA
Artikel-Nr.: 296000450 EGW Savage 10-16 Round Back Short Action 20 MOA Silver Herstellerproduktnummer: 41012841370105397 EGW Savage 10-16 Round Back Short Action Scope Bases. Erweitere die Vielseitigkeit deines Gewehrs mit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Slot-und-Schienenabstand, der schnelle und einfache Änderungen des Augenabstands ermöglicht, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Gehäuse des Gewehrs zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrmontagen. Leichte Tactical Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus ultra-steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauen Loctite zur Montage.
Die EGW Savage 10-16 Round Back Short Action Scope Bases sind aus ultra-steifem 6061 T6 Aluminium präzisionsgefertigt und bieten große Flexibilität bei der Wahl des Zielfernrohrs.
Die einteilige Picatinny-Schiene ermöglicht schnelle und einfache Änderungen des Augenabstands, ohne Bohren oder Gewindeschneiden.
Die Schiene ist gebohrt, um auf die werksseitigen Montagelöcher am Gehäuse des Gewehrs zu passen, und akzeptiert Picatinny- oder Weaver-Zielfernrohrmontagen.
Artikel-Nr.: 296000449 EGW Savage 10-16 Round Back Short Action 0 MOA Silver Herstellerproduktnummer: 41010841370105380 EGW Savage 10-16 Round Back Short Action Scope Bases. Erweitere die Vielseitigkeit deines Gewehrs mit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Slot-und-Schienenabstand, der schnelle und einfache Änderungen des Augenabstands ermöglicht, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Gehäuse des Gewehrs zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrmontagen. Leichte Tactical Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus ultra-steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauen Loctite zur Montage.
Erweitere dein Savage-Gewehr mit der EGW Savage 10-16 Round Back Short Action Scope Base. Präzisionsgefertigt aus Aluminium für flexible Zielfernrohrmontage. Jetzt entdecken! 🔫🔧
EGW Savage 10-16 Round Back Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Mehr...
EGW Savage 10-16 Round Back Short Action Scope Bases. Erweitere die Vielseitigkeit deines Gewehrs mit einer einteiligen Picatinny-Schiene, ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus extrudiertem Aluminium mit Picatinny-Slot-und-Schienenabstand, der schnelle und einfache Änderungen des Augenabstands ermöglicht, sowie große Flexibilität bei der Wahl des Zielfernrohrs. Gebohrt, um auf die werksseitigen Montagelöcher am Gehäuse des Gewehrs zu passen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrmontagen. Leichte Tactical Montagen haben einen gefrästen Mittelkanal zur Gewichtsreduktion. Vollbreite Querschlitze sind nach MIL-STD 1913 Spezifikationen auf +/-.002" kalibriert. Gefertigt aus ultra-steifem, extrudiertem 6061 T6 Aluminium. Inklusive Innensechskant Torx® Schrauben und Schlüssel. EGW empfiehlt 20 inch lbs Drehmoment und einen Tropfen blauen Loctite zur Montage.
Mehr...
Kundenbewertungen zu EGW Savage 10-16 Round Back Short Action 0 MOA
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4
Savage 10TR EGW 20 moa rail(05.04.2016)
Dropped right on to my Savage 10 TR holes lined up and everything!
a little problem(21.08.2010)
I had a customer who purchased a new savage 10 in .308, with an accutrigger. Of course mounting a good scope system was in order. The customer was on a budget and picked this mount to use. In short, the tollerances on the holes were way off. So far off that i couldnt get the all the screws in at all.The finish is great but the holes were way off. I ended up getting a much better mount.
Perfict fit and function.(24.02.2012)
I ordered this mount to replace the 3 sided mount that came with my Savage Model 10-BASK. This mount was an absolute perfect fit and came with the shorter screws for a complete installation. Make sure you follow the instructions and use GREEN loctite for the install and torque it to the 20 inch pounds specified in the instructions. You won't be disappointed!
Great mount(30.10.2016)
As a F Class shooter it has to work every time without fail. The base was easy to install on and looks great. Next time I need a scope base i will buy a EGW. They make great stuff.