Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger.
SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III, and 22/45 pistols.
Mehr...
Drop-In Abzugstuning für .22 Pistolen
Präzisionsgefertigt aus Billet für eine genaue Passform, um das Abzugsgewicht zu reduzieren und den hohen Druck, der benötigt wird, um das Werksstück zu bewegen, zu eliminieren. Hilft, einen gleichmäßigeren Zug für verbesserte Präzision zu erzeugen. Die Stellschraube ist einstellbar für Überweg und Vorweg, selbst wenn die Waffe vollständig montiert ist, sodass du einen Zug ohne Kriechen erhältst. Der ultra-glatte Schuh bietet mehr Kontakt mit dem Abzugsfinger. Verfügbar in schwarz eloxiertem Aluminium oder poliertem Edelstahl (SS). Inklusive Abzugsfeder und Abzugsfederstößel.
SPECS: Aluminium, eloxiert, schwarz oder Edelstahl, natürliche Silberoberfläche. 9mm breite Abzugsschuhfläche. Passend für Ruger Mark I, Mark II, Mark III und 22/45 Pistolen.
Mehr...
Kundenbewertungen zu VOLQUARTSEN Ruger® Target Trigger, Black
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4,4
Far better than their aluminum trigger(25.02.2012)
Overall better fit and finish than the aluminum Volquartsen trigger. I highly recommend this over either the Ruger factory of Volquartsen aluminum trigger.
Nice touch for Mark III(08.03.2012)
The set screw on the back of the trigger is to short ,, needs to be about .070 longer. Other than that its really good . I would buy it again .
Money Well Spent!!!(08.05.2014)
High quality fit and finish. My only gripe is there aren't any instructions on the proper way to adjust the trigger. None with the product or on the company's web site. I wasn't too hard to figure out though. My original trigger pull was a creepy 4&1/4Lbs, this trigger and their replacement sear brought it down to 1&3/4Lbs. very crisp and no creep!
VOLQUARTSEN MK322/45 Trigger(14.05.2014)
I purchased the Ruger 3903 22/45 a month ago, great gun, but it came with one major factory flaw (the mag. disconnect), and one minor flaw the trigger. The trigger had way too much trvel in it, and the pounage was a bit high, so I order this trigger, and handed over to my son AJ. To my surprise he had it changed out, the bushing put in for the disconnect problem, and every thing polished up in no time. He gave me my gun back, and it was like a whole new gun, what a differance in the trigger travel, and even less poundage too boot. The gun is more accurate because of the good crisp trigger, without a good trigger your done for, and the VOLQUARTSEN deffinetly did as promised. Tom
Better have extra set screws(15.09.2011)
Trigger works as advertised and is easy to install, but set screws for trigger stop and pre-travel are too short. Especially the one used as a trigger stop. At proper adjustment for trigger stop only a couple of threads are engaged and it is almost impossible to get a satisfactory setting with the supplied set screw. Of course you don't know this prior to installation, so it becomes a PIA to replace them with longer ones. Be aware of this and have a couple of longer ones on hand before attempting installation. Too bad Volquartsen doesn't furnish a couple of different length set screws to solve this problem, they ain't that expensive considering the cost of the trigger.
Works like a dream(10.03.2012)
Trigger works great ,looks good. But the set screw on the stop ( the one right behind your trigger finger is to short needs to be .312 long 8-32 by .312 long )
Works very well.(02.05.2013)
This trigger did a very nice job of transforming my MKIII into a real tack driver. I installed it with the Volquartsen sear and a Majestic Arms 3.2 Speed Strip kit. The trigger feel after the conversion is very good. Volquartsen must be listening because my trigger came with two lengths of overtravel screw. The Volquartsen installation videos on YouTube are not useful, but there are some very good videos to guide you through the installation. I highly recommend this upgrade to your Mark series Ruger.
Artikel-Nr.: 930012002 VOLQUARTSEN Ruger® Target Trigger, Black Herstellerproduktnummer: VC2TT810162011475 Präzisionsgefertigt aus Billet für eine genaue Passform, um das Abzugsgewicht zu reduzieren und den hohen Druck, der benötigt wird, um das Werksstück zu bewegen, zu eliminieren. Hilft, einen gleichmäßigeren Zug für verbesserte Präzision zu erzeugen. Die Stellschraube ist einstellbar für Überweg und Vorweg, selbst wenn die Waffe vollständig montiert ist, sodass du einen Zug ohne Kriechen erhältst. Der ultra-glatte Schuh bietet mehr Kontakt mit dem Abzugsfinger. Verfügbar in schwarz eloxiertem Aluminium oder poliertem Edelstahl (SS). Inklusive Abzugsfeder und Abzugsfederstößel.
49EUR349,00 €
*
Lieferzeit ca. 14-21 Tage. 3 Stk. im Großlager
Eigenschaften:Art: Adjustable, Drop-In, CurvedFinish: BlackHersteller/Modell: RugerModell: Mark I, Mark II
Präzisionsgefertigter Abzug für Ruger Mark I, Mark II, Mark III und 22/45 Pistolen, verfügbar in schwarz eloxiertem Aluminium oder poliertem Edelstahl.
Einstellbare Stellschraube für Überweg und Vorweg, auch bei vollständig montierter Waffe.
Ultra-glatter Abzugsschuh mit 9mm Breite für besseren Fingerkontakt und reduziertes Abzugsgewicht.
Eigenschaften
Art:
Adjustable,Curved,Drop-In
Finish:
Black
Hersteller/Modell:
Ruger
Modell:
Mark I,Mark II
Versandgewicht: 0,023kgVersandhöhe: 8mmVersandbreite: 70mmVersandlänge: 88mm
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.c
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Artikel-Nr.: 930000123 VOLQUARTSEN Ruger® Target Trigger, SS Herstellerproduktnummer: VC2TTST810162012441 Präzisionsgefertigt aus Billet für eine genaue Passform, um das Abzugsgewicht zu reduzieren und den hohen Druck, der benötigt wird, um das Werksstück zu bewegen, zu eliminieren. Hilft, einen gleichmäßigeren Zug für verbesserte Präzision zu erzeugen. Die Stellschraube ist einstellbar für Überweg und Vorweg, selbst wenn die Waffe vollständig montiert ist, sodass du einen Zug ohne Kriechen erhältst. Der ultra-glatte Schuh bietet mehr Kontakt mit dem Abzugsfinger. Verfügbar in schwarz eloxiertem Aluminium oder poliertem Edelstahl (SS). Inklusive Abzugsfeder und Abzugsfederstößel.
59EUR359,00 €
*
Lieferzeit ca. 14-21 Tage. 3 Stk. im Großlager
Eigenschaften:Art: Adjustable, Drop-In, CurvedFinish: Stainless SteelHersteller/Modell: RugerModell: Mark III, Mark I, Mark II
Verbessere deine Präzision mit dem VOLQUARTSEN Ruger® Mark II™/Mark III™ Target Trigger. Einstellbar und ultra-glatt für perfekten Abzug. Jetzt entdecken! 🔫✨
Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger.
SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III, and 22/45 pistols.
Mehr...
Drop-In Abzugstuning für .22 Pistolen
Präzisionsgefertigt aus Billet für eine genaue Passform, um das Abzugsgewicht zu reduzieren und den hohen Druck, der benötigt wird, um das Werksstück zu bewegen, zu eliminieren. Hilft, einen gleichmäßigeren Zug für verbesserte Präzision zu erzeugen. Die Stellschraube ist einstellbar für Überweg und Vorweg, selbst wenn die Waffe vollständig montiert ist, sodass du einen Zug ohne Kriechen erhältst. Der ultra-glatte Schuh bietet mehr Kontakt mit dem Abzugsfinger. Verfügbar in schwarz eloxiertem Aluminium oder poliertem Edelstahl (SS). Inklusive Abzugsfeder und Abzugsfederstößel.
SPECS: Aluminium, eloxiert, schwarz oder Edelstahl, natürliche Silberoberfläche. 9mm breite Abzugsschuhfläche. Passend für Ruger Mark I, Mark II, Mark III und 22/45 Pistolen.
Mehr...
Kundenbewertungen zu VOLQUARTSEN Ruger® Target Trigger, Black
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4,4
Far better than their aluminum trigger(25.02.2012)
Overall better fit and finish than the aluminum Volquartsen trigger. I highly recommend this over either the Ruger factory of Volquartsen aluminum trigger.
Nice touch for Mark III(08.03.2012)
The set screw on the back of the trigger is to short ,, needs to be about .070 longer. Other than that its really good . I would buy it again .
Money Well Spent!!!(08.05.2014)
High quality fit and finish. My only gripe is there aren't any instructions on the proper way to adjust the trigger. None with the product or on the company's web site. I wasn't too hard to figure out though. My original trigger pull was a creepy 4&1/4Lbs, this trigger and their replacement sear brought it down to 1&3/4Lbs. very crisp and no creep!
VOLQUARTSEN MK322/45 Trigger(14.05.2014)
I purchased the Ruger 3903 22/45 a month ago, great gun, but it came with one major factory flaw (the mag. disconnect), and one minor flaw the trigger. The trigger had way too much trvel in it, and the pounage was a bit high, so I order this trigger, and handed over to my son AJ. To my surprise he had it changed out, the bushing put in for the disconnect problem, and every thing polished up in no time. He gave me my gun back, and it was like a whole new gun, what a differance in the trigger travel, and even less poundage too boot. The gun is more accurate because of the good crisp trigger, without a good trigger your done for, and the VOLQUARTSEN deffinetly did as promised. Tom
Better have extra set screws(15.09.2011)
Trigger works as advertised and is easy to install, but set screws for trigger stop and pre-travel are too short. Especially the one used as a trigger stop. At proper adjustment for trigger stop only a couple of threads are engaged and it is almost impossible to get a satisfactory setting with the supplied set screw. Of course you don't know this prior to installation, so it becomes a PIA to replace them with longer ones. Be aware of this and have a couple of longer ones on hand before attempting installation. Too bad Volquartsen doesn't furnish a couple of different length set screws to solve this problem, they ain't that expensive considering the cost of the trigger.
Works like a dream(10.03.2012)
Trigger works great ,looks good. But the set screw on the stop ( the one right behind your trigger finger is to short needs to be .312 long 8-32 by .312 long )
Works very well.(02.05.2013)
This trigger did a very nice job of transforming my MKIII into a real tack driver. I installed it with the Volquartsen sear and a Majestic Arms 3.2 Speed Strip kit. The trigger feel after the conversion is very good. Volquartsen must be listening because my trigger came with two lengths of overtravel screw. The Volquartsen installation videos on YouTube are not useful, but there are some very good videos to guide you through the installation. I highly recommend this upgrade to your Mark series Ruger.