Ihr Warenkorb ist leer.

Warenkorb

Newsletter abonnieren

TRIPLE-K
REMINGTON 7400 10RD MAGAZINE 30-06 SPRINGFIELD

730745000491 486000002

More Rounds Than Factory Magazine All-Steel Body Gives Rigidity

Durable high-capacity magazine provides a long service life and holds ten rounds for fewer reloads when shooting your Remington 740, 742, 750, or 7400. Folding, leaf spring and nylon follower ensure reliable feeding. Available in .30-06 and .308.

SPECS: Steel, blued. Approximately 31⁄2" (9cm) wide, 37⁄16" (8.7cm) high, 1" (2.54cm) thick. Fits Remington 740, 742, 750 & 7400.

Mehr...

Mehr Patronen als das Werksmagazin - Stahlkörper für hohe Steifigkeit

Das langlebige Hochkapazitätsmagazin gewährleistet eine lange Lebensdauer und fasst zehn Patronen, was weniger Nachladen beim Schießen mit deinem Remington 740, 742, 750 oder 7400 bedeutet. Ein klappbarer, Blattfeder und ein Nylonführer sorgen für zuverlässiges Zuführen. Verfügbar in .30-06 und .308.

SPECS: Stahl, gebläut. Ungefähr 31⁄2" (9cm) breit, 37⁄16" (8.7cm) hoch, 1" (2.54cm) dick. Passt für Remington 740, 742, 750 & 7400.

Mehr...

Kundenbewertungen zu TRIPLE-K Remington 7400/742 Magazine 30-06 Springfield 10rd Steel Bla

Anzahl der Bewertungen: 16
Von brownells.com: 16
Durchschnittliche Bewertung: 2,9

does the job (21.04.2010)

bought for my rem750 in .270 win. ammo loads well, mag fits like a dream and no problems with jams, ftf, etc up to this point.
numbers don't lie, 10>4, hope to be using these for a while

Awesome Purchase (22.06.2010)

This is an awesome addition to my Model 742 and let me tell you, I feel much more comftorable in the woods hunting hogs than with the stock 4 round clip. I fired off 20 rounds in each of the two clips that I purchased and both fired and loaded flawlessly. The one draw back is that I have to hold the action open when I insert the clip in order for it to be fully inserted. Not a big deal for me and I would buy this product again and again.

Works well in 7600 (10.07.2010)

The lack of bolt hold open is a non-issue in the Remington 7600. My particular magazine had a rough start with some extra metal that caught on case mouths as they were fed, but 30 seconds with a Dremmel tool solved that nicely. I traced the contour from the front of a factory mag onto this one and ground to match. Too bad Triple-K didn't do the same at the factory. After cleaning up the front of the magazine I've had no further problems. The spring holds tension well when left loaded. My example has remained loaded for the last 6 years and still feeds rounds as fast as I can shuck the action.

979M REM 7400 10rd magazine (28.05.2011)

I was glad of purchase I made from Italy, so that my friends who have also a Remington 7400 luxury carbine .30-06 I prayed for them to buy the magazine from 10 shots.

Not perfect. (12.09.2011)

I bought 2 of these for my remington 7400 to use at the gun range, the quality is ok but not as good as factory. It needs a little manhandling to get it fully seated into the rifle. I would've like to seen all metal used in the construction (the follower is plastic and has alot of play front to back) The biggest problem I have with it is that it holds the bullets down too long and they mash into the bottom of the feed ramp causing a jam and deformed bullit tips.

Triple K Version is generally good (27.11.2011)

I use it in my 742, 30-06. I initially found that it bound my bolt.
I needed to take it to the grinding wheel (Dremmel) to match my original Remington clip. A few strokes with the grinder and now it feeds properly.

I would recommend it.

not again (19.01.2012)

bought 2 for 742 30-06, fowler poped out, no front tabs to hold fowler in, sides misscut,
sides not bent in at a proper curve to hold rounds, not worth the postage to return to triple k

Good buy. (29.06.2012)

Good buy. ran 50 rounds through it in one session, no misfeeds, worked like a champ.

will not chamber 3 rounds in a row. (03.10.2012)

I have cleaned my rifle, also cleaned both of my 4 and 10 round mags. My rifle shot fine with the 4 round mag, but it would not shoot 3 times in a row with the 10 round mag. It even broke to tip off of 1 of my Ballistic Tip bulletswith the 10 round mag in, the action feels slower like it is dragging. Putting both clips aft end towards each other you can see the original mag is a mil or 2 wider at the feed point. Perhaps thats the problem? Maybe it can be bent?

Poor Quality Magazines (16.09.2014)

Recently bought two of these 10 round magazines for my 30-06.

I first time I put the rounds into one of them,the bottom cap came off, the spring flew out and the rounds ended up on the turf. Was pretty embarrassed at the range..The other magazine that does work is exceptionally tight fitting and difficult to get out of the gun..Not happy at all about this purchase

Tony Magazzi

7400 rifle (11.11.2014)

Bought this for a REM 7400 the clip holds the shell down to long and jams every time. The indents on the side of the clip that raise the bullet is to far forward about a 3/16 in. compared to the clip I use a 280. Might work with bullets that have a very short nose on them or other models.

Very reliable (11.02.2016)

I had a very hard time finding spare or aftermarket magazines for my 7400, either standard or high capacity. It can be a pain at the range to constantly stop shooting and reloading a single four round magazine. It's hard to relax and enjoy what you're doing when you need to constantly stop and reset everything. I was happy to finally find one at Brownells. I ordered two of the ten round magazines, and I love them both. They both work perfectly, and they fit and function more smoothly than the original. Reading the other reviews, it seems that people either love them or hate them. It could be that they have some quality control issues, and I might have caught them on a good day. It's possible they only work well in the 7400 / 7600 models, or maybe just in mine. All I can offer an opinion on are the ones I received, and I'm firmly in the "love them" group. I'll be ordering a couple more as soon as they're back in stock.

Doesn't worn in Model 742 (28.07.2016)

These mags don't load, seat & cause the bolt to jam in Remington Model 742. None of the 7400 series mags seem to fit, load or properly operate either. Keep looking for actual Remington 742 mags otherwise you're just waisting time & money.

Trash (01.03.2018)

The bolt won't cycle if there's more than one round in the mag, won't take more than 5 rounds, the mag takes a lot of force to go into the well which means it doesn't fit.. Also, there's no bolt release on it. I don't know whether to return them or just throw them away because I know it's my civic duty.

Puts bullets in my gun (09.03.2018)

Shipping was a little on the slower side for standard shipping but I was in no rush to get it anyway but it does what a clip is supposed to I put it in my gun and it gave my gun bullets with no jams so there is nothing to complain about

Not bad but needs improvement (12.08.2018)

I had purchased mine and was stoked to get it but first day at the range and it jammed on every round. I did figure out why, it seems the indents in the side of it were to far forward to assist the round into the feed ramps on my 7400, I was able to get some durable epoxy to stick and made a spot on each side to assist the rounds. The quality seems pretty good, put together well just the slight tweaks and it would be a 5 star. Other then the slight issue it works pretty good and fits pretty well but hope who ever makes them can see these and make the proper improvements to make it a great magazine.

Lesen Sie 16 weitere Bewertungen bei brownells.com

49.9 49.9 1 EUR

Artikel-Nr.: 486000002
TRIPLE-K Remington 7400/742 Magazine 30-06 Springfield 10rd Steel Bla
Herstellerproduktnummer: 979M 730745000491 Das langlebige Hochkapazitätsmagazin gewährleistet eine lange Lebensdauer und fasst zehn Patronen, was weniger Nachladen beim Schießen mit deinem Remington 740, 742, 750 oder 7400 bedeutet. Ein klappbarer, Blattfeder und ein Nylonführer sorgen für zuverlässiges Zuführen. Verfügbar in .30-06 und .308.

49.9 EUR 143 49,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Eigenschaften: Action Type: Semi-Auto Aufnahmevermögen: 10-Round Finish: Black Hersteller/Modell: Remington Material: Steel Modell: 7400 Patrone: 30-06 Springfield Menge: 1

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Das langlebige Hochkapazitätsmagazin fasst zehn Patronen und reduziert das Nachladen beim Schießen mit Remington 740, 742, 750 oder 7400.
Ein klappbarer, Blattfeder und ein Nylonführer sorgen für zuverlässiges Zuführen der Patronen.
Hergestellt aus Stahl mit schwarzem Finish, passend für .30-06 Springfield und .308.

Eigenschaften

Action Type: Semi-Auto Finish: Black Hersteller/Modell: Remington Kapazität: 10-Round Material: Steel Modell: 7400 Patrone: 30-06 Springfield Versandgewicht: 0,159kg Versandhöhe: 38mm Versandbreite: 114mm Versandlänge: 180mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.x

🔫 Hochkapazitätsmagazin für Remington 7400/742 in .30-06 Springfield. 10 Schuss, langlebig und zuverlässig. Weniger Nachladen, mehr Schießen! Jetzt entdecken! 💥

More Rounds Than Factory Magazine All-Steel Body Gives Rigidity

SPECS: Steel, blued. Approximately 31⁄2" (9cm) wide, 37⁄16" (8.7cm) high, 1" (2.54cm) thick. Fits Remington 740, 742, 750 & 7400.

Mehr...

Mehr Patronen als das Werksmagazin - Stahlkörper für hohe Steifigkeit

SPECS: Stahl, gebläut. Ungefähr 31⁄2" (9cm) breit, 37⁄16" (8.7cm) hoch, 1" (2.54cm) dick. Passt für Remington 740, 742, 750 & 7400.

Mehr...

Kundenbewertungen zu TRIPLE-K Remington 7400/742 Magazine 30-06 Springfield 10rd Steel Bla

Anzahl der Bewertungen: 16
Von brownells.com: 16
Durchschnittliche Bewertung: 2,9

does the job (21.04.2010)

bought for my rem750 in .270 win. ammo loads well, mag fits like a dream and no problems with jams, ftf, etc up to this point.
numbers don't lie, 10>4, hope to be using these for a while

Awesome Purchase (22.06.2010)

Works well in 7600 (10.07.2010)

979M REM 7400 10rd magazine (28.05.2011)

I was glad of purchase I made from Italy, so that my friends who have also a Remington 7400 luxury carbine .30-06 I prayed for them to buy the magazine from 10 shots.

Not perfect. (12.09.2011)

Triple K Version is generally good (27.11.2011)

not again (19.01.2012)

bought 2 for 742 30-06, fowler poped out, no front tabs to hold fowler in, sides misscut,
sides not bent in at a proper curve to hold rounds, not worth the postage to return to triple k

Good buy. (29.06.2012)

Good buy. ran 50 rounds through it in one session, no misfeeds, worked like a champ.

will not chamber 3 rounds in a row. (03.10.2012)

Poor Quality Magazines (16.09.2014)

7400 rifle (11.11.2014)

Very reliable (11.02.2016)

Doesn't worn in Model 742 (28.07.2016)

Trash (01.03.2018)

Puts bullets in my gun (09.03.2018)

Not bad but needs improvement (12.08.2018)

Lesen Sie 16 weitere Bewertungen bei brownells.com

Kunden kauften auch

Sale

MAGPUL AR-15 PMAG GEN M3 Magazin 223/5.56 10 Schuss Polymer schwarz
MAGPUL AR-15 PMAG GEN M3 Magazin 223/5.56 10 Schuss

MAGPUL

Auf Lager

17,80 € *

Alter Preis 26,90 €

Magazine

4,1

TRIPLE-K Remington 7400/742 Magazine 308 Winchester 10rd Steel Black
TRIPLE-K REMINGTON 7400 10RD MAGAZINE 308 WINCHESTER

TRIPLE-K

Bestellbar, nicht vorrätig

51,90 € *

Magazine

BONDHUS Fold-Up Hex Wrenches, 9 sizes from 5/64" to 1/4"
BONDHUS FOLD-UP WRENCH SETS

BONDHUS

Auf Lager

16,20 € * 14,00 € - 25,90 €*

General-Schraubenschlüssel

ZEV TECHNOLOGIES Gen 4, Drop-In Trigger Kit, 9mm
ZEV TECHNOLOGIES FULCRUM DROP-IN TRIGGER KITS FOR GEN4 GLOCK®

ZEV TECHNOLOGIES

Nicht verfügbar

Abzüge

A-ZOOM 7mm-08 Remington Snap Caps 2/Pack
A-ZOOM AMMO SNAP CAP DUMMY ROUNDS

A-ZOOM

Auf Lager

20,90 € * 15,80 € - 45,90 €*

Trockenabschlaggeräte | Dummie-Patronen

4,2

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.