Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Mehr...
Solide & leicht für die Montage von Zielfernrohren & anderem Optikzubehör
Die Weaver-Stil Zielfernrohrmontageschiene passt genau auf die obere Kontur aller Mossberg 500/590 und 835 Modelle für eine strapazierfähige, passgenaue Installation. Gehalten von vier 8-40 tpi Maschinenschrauben, die dem Rückstoß standhalten, ohne sich zu verformen oder auszuleiern. Gefertigt aus leichtem, extrudiertem Aluminium und eloxiert, um zu den eloxierten oder schwarz lackierten Mossberg-Empfängern zu passen. Akzeptiert alle Weaver-Stil Zielfernrohrmontagen und Zubehör.
SPECS: Aluminium, schwarz, eloxiertes Finish. 5” (12,7cm) lang. 2 oz. (56,6g) Gewicht. Inklusive (4), 8-40 tpi Montageschrauben. Installation erfordert Bohren und Gewindeschneiden bei frühen Modellen des Mossberg 500.
Mehr...
Kundenbewertungen zu HAVLIN Mossberg Scope Rail
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
Rail great - Mossberg receiver marginal(24.06.2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03.09.2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!
Artikel-Nr.: 100002901 HAVLIN Mossberg Scope Rail Herstellerproduktnummer: M500R8 Die Weaver-Stil Zielfernrohrmontageschiene passt genau auf die obere Kontur aller Mossberg 500/590 und 835 Modelle für eine strapazierfähige, passgenaue Installation. Gehalten von vier 8-40 tpi Maschinenschrauben, die dem Rückstoß standhalten, ohne sich zu verformen oder auszuleiern. Gefertigt aus leichtem, extrudiertem Aluminium und eloxiert, um zu den eloxierten oder schwarz lackierten Mossberg-Empfängern zu passen. Akzeptiert alle Weaver-Stil Zielfernrohrmontagen und Zubehör.
38.9EUR038,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Mehr...
Solide & leicht für die Montage von Zielfernrohren & anderem Optikzubehör
Die Weaver-Stil Zielfernrohrmontageschiene passt genau auf die obere Kontur aller Mossberg 500/590 und 835 Modelle für eine strapazierfähige, passgenaue Installation. Gehalten von vier 8-40 tpi Maschinenschrauben, die dem Rückstoß standhalten, ohne sich zu verformen oder auszuleiern. Gefertigt aus leichtem, extrudiertem Aluminium und eloxiert, um zu den eloxierten oder schwarz lackierten Mossberg-Empfängern zu passen. Akzeptiert alle Weaver-Stil Zielfernrohrmontagen und Zubehör.
SPECS: Aluminium, schwarz, eloxiertes Finish. 5” (12,7cm) lang. 2 oz. (56,6g) Gewicht. Inklusive (4), 8-40 tpi Montageschrauben. Installation erfordert Bohren und Gewindeschneiden bei frühen Modellen des Mossberg 500.
Mehr...
Kundenbewertungen zu HAVLIN Mossberg Scope Rail
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
Rail great - Mossberg receiver marginal(24.06.2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03.09.2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!