Features & Benefits: Accepts any push-button Quick Detach sling swivel 8 position rotation limited to prevent sling wrap-up 95% lower profile than a separate Sling Mount and Picatinny Mil-Spec 1913 Rail Section, the ergonomic, flush mount design eliminates all sharp edges that can ensnarl the operator’s gear Designed to fit precisely through any vent hole in the Troy Industries TRX Extreme and Alpha Battle Rails with no modifications Can be mounted through a single ½” diameter hole in most polymer stocks, handguards, forends, and buttstocks measuring up to .230” in thickness, including M.O.E. Handguards by Magpul Industries. Once inserted through the hole in the handguard, forend, stock, or buttstock, the mount is retained by a “Spirolock” on the outside assisted by a pair of setscrews from the inside to prevent the mount from rotating. This patent pending design places all the slinging stresses in compression against the inside mounting surface instead of in tension on the thread of fasteners Weighing just .243 ounces, the ultra-lightweight design CNC machined from Billet 303 Stainless Steel eliminates all unnecessary material and fasteners. Finished in Black Oxide to prevent rust, wear, and corrosion
SPECS: CNC Machined from Billet 303 Stainless Steel. Weighs: .243 oz.
Mehr...
Features & Benefits: Akzeptiert jeden Push-Button Quick Detach Sling Swivel 8 Positionen Rotation begrenzt, um das Verwickeln des Slings zu verhindern 95% niedrigeres Profil als eine separate Sling Mount und Picatinny Mil-Spec 1913 Rail Section, das ergonomische, bündige Montagedesign eliminiert alle scharfen Kanten, die die Ausrüstung des Bedieners verhaken können Entwickelt, um präzise durch jedes Belüftungsloch in den Troy Industries TRX Extreme und Alpha Battle Rails zu passen ohne Modifikationen Kann durch ein einzelnes ½” Durchmesserloch in den meisten Polymer-Schäften, Handguards, Vordergriffen und Kolben montiert werden, die bis zu .230” dick sind, einschließlich M.O.E. Handguards von Magpul Industries. Einmal durch das Loch im Handguard, Vordergriff, Schaft oder Kolben eingeführt, wird die Montage durch ein „Spirolock“ von außen gehalten, unterstützt durch ein Paar Stellschrauben von innen, um die Drehung der Montage zu verhindern. Dieses zum Patent angemeldete Design verteilt alle Belastungen durch den Sling in Kompression gegen die innere Montagefläche anstatt in Zug auf das Gewinde der Befestigungselemente Mit nur .243 Unzen Gewicht, eliminiert das ultra-leichte Design CNC-gefräst aus Billet 303 Edelstahl unnötiges Material und Befestigungselemente. Abgeschlossen in Schwarzoxid, um Rost, Verschleiß und Korrosion zu verhindern
SPECS: CNC-gefräst aus Billet 303 Edelstahl. Gewicht: .243 oz.
Mehr...
Kundenbewertungen zu IMPACT WEAPONS COMPONENTS MICRO FLUSH QD SLING MOUNT
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 5
Cool idea(19.04.2012)
Used on a Troy Alpha and Magpul MOE. Put the spiro-lock on the higher recess and the mount is almost imperceptible on the Troy when not in use. Search on line for install instructions for MOE or other plastic handguards. Suggest using a Forstner style bit to drill. The Magpul stuff is tough is cuts slowly - be patient. A very cool product. Why didn't someone think of this years ago?
Brilliant idea(21.04.2012)
For Troy Alpha: It doesn't get better. Much cheaper and much lower profile than the Troy part (in fact hardly noticeable on the Alpha when QD not inserted).
For MOE handguard - carbine. Use a Forestner bit to drill. If you don't want to overlap the rear slot, you can drill the hole on on the 45 degree section (10 o'clock). Perfect location, out of line of sight, but also completely out of the way of support hand.
Works great(14.10.2012)
I can't say enough about how good this product is combined with the Magpul MOE forends. I will say that the plastic (on the MOE forend) is tough to cleanly drill through. The manufacturer had a lot of good information on how to get this done right on their site.
Excellent product(30.05.2014)
Simple Installation - all you need is a 1/2" Forstner bit and you're good to go. Puts a sling swivel right where you want it. Great price too.
Artikel-Nr.: 100009719 IMPACT WEAPONS COMPONENTS MICRO FLUSH QD SLING MOUNT Herstellerproduktnummer: SQDRLMM850962003409 Features & Benefits: Akzeptiert jeden Push-Button Quick Detach Sling Swivel 8 Positionen Rotation begrenzt, um das Verwickeln des Slings zu verhindern 95% niedrigeres Profil als eine separate Sling Mount und Picatinny Mil-Spec 1913 Rail Section, das ergonomische, bündige Montagedesign eliminiert alle scharfen Kanten, die die Ausrüstung des Bedieners verhaken können Entwickelt, um präzise durch jedes Belüftungsloch in den Troy Industries TRX Extreme und Alpha Battle Rails zu passen ohne Modifikationen Kann durch ein einzelnes ½” Durchmesserloch in den meisten Polymer-Schäften, Handguards, Vordergriffen und Kolben montiert werden, die bis zu .230” dick sind, einschließlich M.O.E. Handguards von Magpul Industries. Einmal durch das Loch im Handguard, Vordergriff, Schaft oder Kolben eingeführt, wird die Montage durch ein „Spirolock“ von außen gehalten, unterstützt durch ein Paar Stellschrauben von innen, um die Drehung der Montage zu verhindern. Dieses zum Patent angemeldete Design verteilt alle Belastungen durch den Sling in Kompression gegen die innere Montagefläche anstatt in Zug auf das Gewinde der Befestigungselemente Mit nur .243 Unzen Gewicht, eliminiert das ultra-leichte Design CNC-gefräst aus Billet 303 Edelstahl unnötiges Material und Befestigungselemente. Abgeschlossen in Schwarzoxid, um Rost, Verschleiß und Korrosion zu verhindern
Nimmt jeden Push-Button Quick Detach Sling Swivel und begrenzt die Rotation auf 8 Positionen, um ein Verwickeln zu verhindern.
Ergonomisches, bündiges Montagedesign, das durch jedes Belüftungsloch in Troy Industries TRX Extreme und Alpha Battle Rails passt.
Ultra-leichte Konstruktion aus CNC-gefrästem Billet 303 Edelstahl, wiegt nur .243 Unzen und ist schwarzoxidiert, um Rost und Verschleiß zu verhindern.
Eigenschaften
Farbe:
Black
Versandgewicht: 0,068kgVersandbreite: 102mmVersandlänge: 178mm
Artikeldetails
Made in USA
Entdecken Sie den IMPACT WEAPONS COMPONENTS MICRO FLUSH QD SLING MOUNT! Ultraleicht, robust und einfach zu montieren. Perfekt für taktische Anwendungen. Jetzt mehr erfahren! ⚙️🔧
Features & Benefits: Accepts any push-button Quick Detach sling swivel 8 position rotation limited to prevent sling wrap-up 95% lower profile than a separate Sling Mount and Picatinny Mil-Spec 1913 Rail Section, the ergonomic, flush mount design eliminates all sharp edges that can ensnarl the operator’s gear Designed to fit precisely through any vent hole in the Troy Industries TRX Extreme and Alpha Battle Rails with no modifications Can be mounted through a single ½” diameter hole in most polymer stocks, handguards, forends, and buttstocks measuring up to .230” in thickness, including M.O.E. Handguards by Magpul Industries. Once inserted through the hole in the handguard, forend, stock, or buttstock, the mount is retained by a “Spirolock” on the outside assisted by a pair of setscrews from the inside to prevent the mount from rotating. This patent pending design places all the slinging stresses in compression against the inside mounting surface instead of in tension on the thread of fasteners Weighing just .243 ounces, the ultra-lightweight design CNC machined from Billet 303 Stainless Steel eliminates all unnecessary material and fasteners. Finished in Black Oxide to prevent rust, wear, and corrosion
SPECS: CNC Machined from Billet 303 Stainless Steel. Weighs: .243 oz.
Mehr...
Features & Benefits: Akzeptiert jeden Push-Button Quick Detach Sling Swivel 8 Positionen Rotation begrenzt, um das Verwickeln des Slings zu verhindern 95% niedrigeres Profil als eine separate Sling Mount und Picatinny Mil-Spec 1913 Rail Section, das ergonomische, bündige Montagedesign eliminiert alle scharfen Kanten, die die Ausrüstung des Bedieners verhaken können Entwickelt, um präzise durch jedes Belüftungsloch in den Troy Industries TRX Extreme und Alpha Battle Rails zu passen ohne Modifikationen Kann durch ein einzelnes ½” Durchmesserloch in den meisten Polymer-Schäften, Handguards, Vordergriffen und Kolben montiert werden, die bis zu .230” dick sind, einschließlich M.O.E. Handguards von Magpul Industries. Einmal durch das Loch im Handguard, Vordergriff, Schaft oder Kolben eingeführt, wird die Montage durch ein „Spirolock“ von außen gehalten, unterstützt durch ein Paar Stellschrauben von innen, um die Drehung der Montage zu verhindern. Dieses zum Patent angemeldete Design verteilt alle Belastungen durch den Sling in Kompression gegen die innere Montagefläche anstatt in Zug auf das Gewinde der Befestigungselemente Mit nur .243 Unzen Gewicht, eliminiert das ultra-leichte Design CNC-gefräst aus Billet 303 Edelstahl unnötiges Material und Befestigungselemente. Abgeschlossen in Schwarzoxid, um Rost, Verschleiß und Korrosion zu verhindern
SPECS: CNC-gefräst aus Billet 303 Edelstahl. Gewicht: .243 oz.
Mehr...
Kundenbewertungen zu IMPACT WEAPONS COMPONENTS MICRO FLUSH QD SLING MOUNT
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 5
Cool idea(19.04.2012)
Used on a Troy Alpha and Magpul MOE. Put the spiro-lock on the higher recess and the mount is almost imperceptible on the Troy when not in use. Search on line for install instructions for MOE or other plastic handguards. Suggest using a Forstner style bit to drill. The Magpul stuff is tough is cuts slowly - be patient. A very cool product. Why didn't someone think of this years ago?
Brilliant idea(21.04.2012)
For Troy Alpha: It doesn't get better. Much cheaper and much lower profile than the Troy part (in fact hardly noticeable on the Alpha when QD not inserted).
For MOE handguard - carbine. Use a Forestner bit to drill. If you don't want to overlap the rear slot, you can drill the hole on on the 45 degree section (10 o'clock). Perfect location, out of line of sight, but also completely out of the way of support hand.
Works great(14.10.2012)
I can't say enough about how good this product is combined with the Magpul MOE forends. I will say that the plastic (on the MOE forend) is tough to cleanly drill through. The manufacturer had a lot of good information on how to get this done right on their site.
Excellent product(30.05.2014)
Simple Installation - all you need is a 1/2" Forstner bit and you're good to go. Puts a sling swivel right where you want it. Great price too.