Ihr Warenkorb ist leer.

Warenkorb

3 BUCC INC.
AR-15/M16 BRASS-SAVR BRASS CATCHER

100000735

Save your Spent Brass Without Crawling On The Ground

Cotton-poly bag, supported by steel frame. Holds 70 rounds of .223 brass; easy-open bottom unloads fast. Separate models to fit carry handle and flattop AR-style rifles.

SPECS: Cotton-poly cloth bag, steel frame, polymer mount, black, matte finish. 4¼" (10.8cm) wide, 3½" (9cm) long, 7¼" (18.4cm) deep.

Mehr...

Sammle deine verschossenen Hülsen, ohne am Boden kriechen zu müssen

Baumwoll-Polyestertasche, unterstützt durch Stahlrahmen. Fasst 70 Patronenhülsen von .223 Messing; Boden lässt sich leicht öffnen und schnell entleeren. Separate Modelle passend für Tragegriff und Flattop AR-Stil Gewehre.

SPECS: Baumwoll-Polyestertasche, Stahlrahmen, Polymerhalterung, schwarz, mattes Finish. 4¼" (10,8 cm) breit, 3½" (9 cm) lang, 7¼" (18,4 cm) tief.

Mehr...

Kundenbewertungen zu 3 BUCC INC. AR-15/308AR Flat Top Brass Catcher Black

Anzahl der Bewertungen: 24
Von brownells.com: 24
Durchschnittliche Bewertung: 4,1

Flat Top Brass Catcher (17.08.2009)

I really like this product. It was back ordered for about a month before I received it but it was everything that I expected. It works really well. I would give this item 5 stars except for the fact that you cannot get spare mounts to use on other firearms, they are not sold separately. I also have been trying to contact 3Bucc directly by email and voice messages on how to purchase these spares and have not received Anything back, email nor phone call. Sometimes the number on their web site just rings and rings and no one picks up, then the next time you call the answering machine does.
Frustrated.

worthwhile addition to your range box (28.10.2010)

I have been using one of these on my ar15s and ar10s for about 7 or 8 years. They are great if you want to reload, and also help to keep the litter down at the ranch rifle range where I shoot.
I was able to order a couple of the plastic rail mount things from 3Bucc a couple of years ago, so I could switch the brasscatcher between ARs quickly. I wish Brownells would sell the mount as a separate item or sell the catcher with 2 mounts.

wish it would fit over the top (31.10.2010)

I bought one of these and to my surprise it doesn't fit over the picatiny rail. If you have iron sights or anything else on your rail, you must remove it to slide the mount on from either end. Makes moving it to different weapons a pain. The quality is nice but doesn't over come the flawed design. I have tried calling 3bucc several times and I just get the answering machine and no one calls me back.

Works great (09.02.2011)

The brass catcher is by far the best I've used. Holds a decent amount of brass, stays put once in place, and can be removed/reattached quickly. The only negative I could mention is that it can be a challenge to attach when using optics.

Best AR brass catcher by far! (20.03.2011)

I've tried some other brass catchers for AR15 rifles, they have all been very disappointing, the fit poorly and didn't want to stay in position. The 3 Bucc was more expensive, but it looked like a much better design, I've now used it and I'm very impressed with this one, it fits, and it stays in place, it catches all the brass and doesn't kick it back into the chamber like the others.

The major suggestion for this brass catcher is to have additional mounts available so it can easily moved to another rifle.

Very Good [...] (02.07.2011)

Easy to use [...] the best I have found and do recommend it

It works! (12.09.2011)

Quality brass catcher, although a little expensive.

Works well / no malfunctions. Held two mags worth of 5.56 brass (60 pieces) easily.

Rear BUIS had to be removed to install rail adapter. This can be a pain if you don't have quick-disconnect mounts for red dot, scope, etc. Additional rail adapters can be had if you look around, unfortunately Brownells doesn't sell them.

excellent!! (11.11.2012)

this thing is very well thought out, well built and easy to use... could be considered a little spendy but it works perfect and is a nice robust piece. i'd buy it again in a heartbeat!

BEST BRASS CATCHER (17.12.2012)

I put this on my M4 and got exactly what I paid for, THE BEST BRASS CATCHER. When it says it holds 70 pieces they were wrong, it hold a few more. I am so happy I purchased this I am buying a second one for my Step-Son. I even ran it with a Slide-Fire stock and held the all the spent shells with no jamming or obstructions, and I was also running a 60 round clip which should be another great review...

Plastic base scares me! (11.03.2013)

Catcher appears to be very well made. I have an Armalite base on my AR (1" EX0027)the thumb screws (nuts) on the base are in the way of getting a tight fit to the side of rifle.I've got a feeling this plastic base is not going to hold up to the rigors of coyote hunting.I'm going to a burris base in 30mm believe nuts are on left side of rifle should fix the problem. I feel that at some time this base is going to crack. Since it seems that you can't order replacement parts,I'm going to try an make the part out of a set of old steel rings.

Best brass catcher I've ever used. (16.09.2013)

Works like a charm, well made, not cheap like the Caldwell ones. Would be nice to be able to purchase a couple of extra mounts for other rifles, and finding a quick on/off solution for removing it wouldn't hurt either, but these are minor issues. Awesome product! I may just purchase another.

I would buy this product again. (01.01.2014)

Works like a charm, well made. Would be great to be able to purchase a couple of extra mounts for other rifles, and finding a quick on/off solution for removing it wouldn't hurt either. However, this would mean less sales, but I would not mind paying for extra mounts instead of purchasing another complete bag. Nice product. Just make sure you have enough rail space at the end in case you have some big scope attached, I barely had enough room to install the mount.

Worthless (03.07.2014)

Agree with other shooter that you have to remove iron sights if they are on the rail in order to put their mount on. Once the mount is on the location is NOT correct due to the location of the scope mounted on the rail. I use an elcan.

great for old left-hand shooters (30.10.2014)

Left handed shooters don't get hot shells hitting your ear. Also great at the ranges for collecting your shells no stoupping and sweeping with bad brooms. I reload so collecting shells are so easy. Being left handed hot shells don't hit your ear muffs or the shooter to your right.clean and quiet way of collecting your brass. When I'm at the range I am there to shoot not hunt and pick up brass.

Works perfectly (28.12.2014)

The fit to the upper is nice. I did have to open up the slot in the mount to fit on the rail however I believe that is because the riser was cheap and I think its is out of spec. It fit on to the rail that was on the upper perfectly. It caught 90 rounds without fail. I think it will catch 100 rounds easily. It matches up to the opening nicely with the riser on and did exactly what it is supposed to do.

Best brass catcher I've seen ! (02.07.2015)

Great product ! I bought one of these a couple of months ago, and could not believe how well it fits and works on my AR 15s. The only negative is that you cannot buy the attachment for the picatinny rail so that the catcher can be used for more than one gun. On my long range AR, the large scope made it impossible to remove the brass catcher attachment without removing the scope, the reason for purchasing another.

It's not cheap, but if you buy cheap first, you'll regret not buying this one.

Best Brass Catcher I Have Had (19.06.2016)

I use this brass catcher when target shooting. I have had few different kinds of brass catchers that caused all kinds of problems. This is the best one so far. It works so well that I am not aware that it is attached to the rifle. It holds 50 5.56 brass casing with no problem. Once in a while one casing may sneak through, but its not often. One issue that may occur that you need to look and verify is the mounting on a flattop, make sure you have clearance with your scope and rings.

Won't work on RR LAR-8 (11.08.2017)

Purchased this for my RR LAR-8 and it will not fit on my rifle. I decided to try it on my AR-15 only to discover that it will not work with my Leupold Mark 2 Scope mount. The two 1/2" nuts that the Mark 2 uses interfere with mounting the brass catcher. The catcher is very well made and would be great if it would fit my rifles......

well made product (07.12.2017)

I have used few times on YHM 5.56 upper w an ACOG/Larue mounted.

Works perfectly. sturdy, not flimsy,

railmount is a very tough plastic (?)

Mount Fit was very tight on the rails - had to tap to install but also

a nice snug fit. Did not move after mounting.

2 rails "friction fit" into the mounted holder. tight fit. All cases

were ejected into bag, no feed, jam issues. I put a piece of

crumpled light cardboard into the bag - to give shape and have brass strike1st, then drop, fwiw.

over heats the gun (28.09.2009)

needs vented some way

One of the Best (17.10.2009)

This Bras Catcher works great on a .223 flat top receiver and allows for mounting of different sights bases.

Great product (26.06.2010)

Works perfectly-fits nicely. Very well made. This is the very best of several I have tried. Far superior to the ones that attach with velcro.

Good piece of kit (15.04.2014)

The only Con I can think of is that it collects brass too fast. I keep having to empty it.

The Best AR brass catcher period! (19.07.2014)

This is the only decent brass catcher for carry handle AR's. It installs easily and never hinders the rifles operation. All empty brass is ejected cleanly to the bag where it is collected with no problems. I might have liked a zipper rather than the velcreo bag closure, If you are a reloader this is what you need.

Lesen Sie 24 weitere Bewertungen bei brownells.com

103.9 133.9 2 EUR

Artikel-Nr.: 100000735
3 BUCC INC. AR-15/308AR Flat Top Brass Catcher Black
Herstellerproduktnummer: NONE Baumwoll-Polyestertasche, unterstützt durch Stahlrahmen. Fasst 70 Patronenhülsen von .223 Messing; Boden lässt sich leicht öffnen und schnell entleeren. Separate Modelle passend für Tragegriff und Flattop AR-Stil Gewehre.

133.9 EUR 20 133,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Eigenschaften: Art: Brass Catcher Farbe: Black Material: Nylon

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Brass Catcher Farbe: Black Material: Nylon Versandgewicht: 0,159kg Versandhöhe: 81mm Versandbreite: 119mm Versandlänge: 175mm

Artikeldetails

Made in USA

Artikel-Nr.: 100000428
3 BUCC INC. Carry Handle Brass-Savr
Herstellerproduktnummer: NONE Baumwoll-Polyestertasche, unterstützt durch Stahlrahmen. Fasst 70 Patronenhülsen von .223 Messing; Boden lässt sich leicht öffnen und schnell entleeren. Separate Modelle passend für Tragegriff und Flattop AR-Stil Gewehre.

103.9 EUR 22 103,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Eigenschaften: Art: Brass Catcher Farbe: Black Material: Nylon

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Brass Catcher Farbe: Black Material: Nylon Versandgewicht: 0,159kg Versandhöhe: 91mm Versandbreite: 130mm Versandlänge: 140mm

Artikeldetails

Made in USA

Entdecken Sie den 3 BUCC INC. AR-15/M16 Brass Catcher! 🏹 Fängt bis zu 70 Hülsen auf, robust und leicht zu entleeren. Perfekt für Flattop AR-Gewehre. Jetzt mehr erfahren!

Save your Spent Brass Without Crawling On The Ground

Cotton-poly bag, supported by steel frame. Holds 70 rounds of .223 brass; easy-open bottom unloads fast. Separate models to fit carry handle and flattop AR-style rifles.

SPECS: Cotton-poly cloth bag, steel frame, polymer mount, black, matte finish. 4¼" (10.8cm) wide, 3½" (9cm) long, 7¼" (18.4cm) deep.

Mehr...

Sammle deine verschossenen Hülsen, ohne am Boden kriechen zu müssen

SPECS: Baumwoll-Polyestertasche, Stahlrahmen, Polymerhalterung, schwarz, mattes Finish. 4¼" (10,8 cm) breit, 3½" (9 cm) lang, 7¼" (18,4 cm) tief.

Mehr...

Kundenbewertungen zu 3 BUCC INC. AR-15/308AR Flat Top Brass Catcher Black

Anzahl der Bewertungen: 24
Von brownells.com: 24
Durchschnittliche Bewertung: 4,1

Flat Top Brass Catcher (17.08.2009)

worthwhile addition to your range box (28.10.2010)

wish it would fit over the top (31.10.2010)

Works great (09.02.2011)

Best AR brass catcher by far! (20.03.2011)

Very Good [...] (02.07.2011)

Easy to use [...] the best I have found and do recommend it

It works! (12.09.2011)

excellent!! (11.11.2012)

this thing is very well thought out, well built and easy to use... could be considered a little spendy but it works perfect and is a nice robust piece. i'd buy it again in a heartbeat!

BEST BRASS CATCHER (17.12.2012)

Plastic base scares me! (11.03.2013)

Best brass catcher I've ever used. (16.09.2013)

I would buy this product again. (01.01.2014)

Worthless (03.07.2014)

great for old left-hand shooters (30.10.2014)

Works perfectly (28.12.2014)

Best brass catcher I've seen ! (02.07.2015)

Best Brass Catcher I Have Had (19.06.2016)

Won't work on RR LAR-8 (11.08.2017)

well made product (07.12.2017)

over heats the gun (28.09.2009)

needs vented some way

One of the Best (17.10.2009)

This Bras Catcher works great on a .223 flat top receiver and allows for mounting of different sights bases.

Great product (26.06.2010)

Works perfectly-fits nicely. Very well made. This is the very best of several I have tried. Far superior to the ones that attach with velcro.

Good piece of kit (15.04.2014)

The only Con I can think of is that it collects brass too fast. I keep having to empty it.

The Best AR brass catcher period! (19.07.2014)

Lesen Sie 24 weitere Bewertungen bei brownells.com

Kunden kauften auch

Sale

MAGPUL AR-15 PMAG GEN M3 Magazin 223/5.56 20 Schuss Polymer schwarz
MAGPUL AR-15 PMAG GEN M3 Magazin 223/5.56 20 Schuss

MAGPUL

Auf Lager

22,90 € *

Alter Preis 26,90 €

Magazine

Sale

MAGPUL AR-15 PMAG GEN M3 Magazin 223/5.56 10 Schuss Polymer schwarz
MAGPUL AR-15 PMAG GEN M3 Magazin 223/5.56 10 Schuss

MAGPUL

Auf Lager

17,80 € *

Alter Preis 26,90 €

Magazine

4,1

MAGPUL AR .308 PMAG LR/SR GEN M3 Magazin 308 Win 20 Schuss Polymer schwarz
MAGPUL AR .308 20 SCHUSS PMAG LR/SR GEN M3 MAGAZIN 308 WINCHESTER

MAGPUL

Bestellbar, nicht vorrätig

35,18 € *

Magazine

3,8

BROWNELLS Action Block & Lower Vise Block Set
BROWNELLS AR-15/M16 LOWER RECEIVER VISE BLOCK

BROWNELLS

Auf Lager

68,90 € * 29,90 € - 68,90 €*

Arbeitsblöcke & Schraubstöcke

3,6

Entdecken Sie die MTM Rifle Ammo Boxes für 17 Remington bis 6x47. Robustes Polypropylen, Snap-Lock-Verschluss und mechanisches Scharnier. Perfekt für Schießsport! 🔫📦 Jetzt kaufen!

MTM Ammo Boxes Rifle Blue 17 Remington - 6x47 100
MTM RIFLE AMMO BOXES

MTM CASE-GARD

Auf Lager

15,90 € * 13,00 € - 19,70 €*

Patronenschachteln für Langwaffenpatronen

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.