Replaces Every Pin In the Pistol; Heat-Hardened For Strength & Durability
Complete set of the 11 precision-ground pins and plungers for refurbishing an existing 1911 or for building a new one from scratch. Heat-treated for superb resistance to surface-wear for a long service life. Available in matte blued carbon steel or natural-finish stainless steel.
SPECS: Heat-treated carbon steel (CS), blued, or stainless steel (SS), natural finish. Set includes solid ejector pin, sear pin, hammer pin, hammer strut pin, barrel link pin, slide stop plunger, thumb safety plunger, mainspring cap, mainspring cap pin, mainspring retainer pin, and mainspring housing pin. Fits 1911 Government Model and Commander and clones; will not fit Officers model.
Mehr...
Ersetzt jeden Stift in der Pistole; Hitzegehärtet für Stärke & Haltbarkeit
Komplettes Set aus 11 präzisionsgeschliffenen Stiften und Plungern zum Überholen einer bestehenden 1911 oder zum Neubau einer Waffe von Grund auf. Wärmebehandelt für hervorragende Beständigkeit gegen Oberflächenverschleiß für eine lange Lebensdauer. Erhältlich in matt gebläutem Kohlenstoffstahl oder naturbelassenem Edelstahl.
SPECS: Wärmebehandelter Kohlenstoffstahl (CS), gebläut, oder Edelstahl (SS), naturbelassen. Das Set beinhaltet soliden Auswerferstift, Abzugstift, Hammerstift, Hammergestängestift, Laufverbindungsstift, Schlittenstopplunger, Daumensicherungsplunger, Mainspringkappe, Mainspringkappenstift, Mainspringhaltestift und Mainspringgehäusestift. Passend für 1911 Government Model und Commander und Klone; passt nicht für Officers Modell.
Mehr...
Kundenbewertungen zu CASPIAN 1911 Pin Set, CS
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 3
Buyer Beware(27.12.2011)
I bought this set of pins to finish out a 1911 build I'm doing for my wife. I ordered the Caspian Race Ready Receiver (168-100-110) for the build, so I figured I'd order this pin set since it's made by the same manufacturer. The ejector pin in this set is solid, and I think it's slightly oversize, as it bent while I was trying to install it into the ejector pin hole (yes, I had done the requisite notching of the ejector post, and there was no blocking of the hole when I looked thru it; I also should have measured the diameter of the pin against the diameter of the hole--I really think a roll pin is better for this application).
Additionally, if you decide to use the Cylinder and Slide Professional Trigger Kit (206-000-019), the hammer strut pin in this set is too large (the pin is .095 and the hole in the hammer is about .093). I reamed out the hole in the hammer, but it was still a very hard pin to drive in.
In the future, I will probably order a different set of pins. I may or may not order Caspian pins again, I haven't yet decided. The mainspring parts are all fine, as are the plunger pins and the sear and hammer pins.
I want to caveat the "Would you recommend this to a friend" question by saying I would recommend it, but I would also tell them what I experienced.
Artikel-Nr.: 168000128 CASPIAN 1911 Pin Set, CS Herstellerproduktnummer: P28BC Komplettes Set aus 11 präzisionsgeschliffenen Stiften und Plungern zum Überholen einer bestehenden 1911 oder zum Neubau einer Waffe von Grund auf. Wärmebehandelt für hervorragende Beständigkeit gegen Oberflächenverschleiß für eine lange Lebensdauer. Erhältlich in matt gebläutem Kohlenstoffstahl oder naturbelassenem Edelstahl.
Artikel-Nr.: 168000127 CASPIAN 1911 pin Set, SS Herstellerproduktnummer: P28SC Komplettes Set aus 11 präzisionsgeschliffenen Stiften und Plungern zum Überholen einer bestehenden 1911 oder zum Neubau einer Waffe von Grund auf. Wärmebehandelt für hervorragende Beständigkeit gegen Oberflächenverschleiß für eine lange Lebensdauer. Erhältlich in matt gebläutem Kohlenstoffstahl oder naturbelassenem Edelstahl.
45.9EUR045,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Replaces Every Pin In the Pistol; Heat-Hardened For Strength & Durability
Complete set of the 11 precision-ground pins and plungers for refurbishing an existing 1911 or for building a new one from scratch. Heat-treated for superb resistance to surface-wear for a long service life. Available in matte blued carbon steel or natural-finish stainless steel.
SPECS: Heat-treated carbon steel (CS), blued, or stainless steel (SS), natural finish. Set includes solid ejector pin, sear pin, hammer pin, hammer strut pin, barrel link pin, slide stop plunger, thumb safety plunger, mainspring cap, mainspring cap pin, mainspring retainer pin, and mainspring housing pin. Fits 1911 Government Model and Commander and clones; will not fit Officers model.
Mehr...
Ersetzt jeden Stift in der Pistole; Hitzegehärtet für Stärke & Haltbarkeit
Komplettes Set aus 11 präzisionsgeschliffenen Stiften und Plungern zum Überholen einer bestehenden 1911 oder zum Neubau einer Waffe von Grund auf. Wärmebehandelt für hervorragende Beständigkeit gegen Oberflächenverschleiß für eine lange Lebensdauer. Erhältlich in matt gebläutem Kohlenstoffstahl oder naturbelassenem Edelstahl.
SPECS: Wärmebehandelter Kohlenstoffstahl (CS), gebläut, oder Edelstahl (SS), naturbelassen. Das Set beinhaltet soliden Auswerferstift, Abzugstift, Hammerstift, Hammergestängestift, Laufverbindungsstift, Schlittenstopplunger, Daumensicherungsplunger, Mainspringkappe, Mainspringkappenstift, Mainspringhaltestift und Mainspringgehäusestift. Passend für 1911 Government Model und Commander und Klone; passt nicht für Officers Modell.
Mehr...
Kundenbewertungen zu CASPIAN 1911 Pin Set, CS
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 3
Buyer Beware(27.12.2011)
I bought this set of pins to finish out a 1911 build I'm doing for my wife. I ordered the Caspian Race Ready Receiver (168-100-110) for the build, so I figured I'd order this pin set since it's made by the same manufacturer. The ejector pin in this set is solid, and I think it's slightly oversize, as it bent while I was trying to install it into the ejector pin hole (yes, I had done the requisite notching of the ejector post, and there was no blocking of the hole when I looked thru it; I also should have measured the diameter of the pin against the diameter of the hole--I really think a roll pin is better for this application).
Additionally, if you decide to use the Cylinder and Slide Professional Trigger Kit (206-000-019), the hammer strut pin in this set is too large (the pin is .095 and the hole in the hammer is about .093). I reamed out the hole in the hammer, but it was still a very hard pin to drive in.
In the future, I will probably order a different set of pins. I may or may not order Caspian pins again, I haven't yet decided. The mainspring parts are all fine, as are the plunger pins and the sear and hammer pins.
I want to caveat the "Would you recommend this to a friend" question by saying I would recommend it, but I would also tell them what I experienced.