CNC-machined, steel, rear sight with Novak’s famous, low-profile design and the added versatility of elevation and windage adjustments. Set screw allows drift adjustment for windage; elevation screw positively stops and audibly clicks for easy fine-tuning. Smooth, contoured edges have less chance of catching or snagging. Available in for Colt and SW1911 pistols.
Mehr...
CNC-gefräste, stählerne, hintere Visierung von Novak mit dem berühmten, flachen Profil und zusätzlicher Vielseitigkeit durch Höhen- und Seitenverstellung. Eine Feststellschraube ermöglicht die seitliche Justierung; die Höhenschraube stoppt sicher und klickt hörbar für eine einfache Feinabstimmung. Die glatten, konturierten Kanten haben eine geringere Chance, hängen zu bleiben oder zu verhaken. Verfügbar für Colt und SW1911 Pistolen.
Mehr...
Kundenbewertungen zu NOVAK Rear Sights, WD fits Colt
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 2,8
Very Good Sight(16.10.2012)
I installed this sight on my Colt Combat Elite XSE 1911. It required some hand milling (1/8" wide) on the slide top and a little on the dovetails. It came with excellent instructions and diagrams on how to. I also installed the Novak fiber Optic front sight (662-000-040WD-.190"height) to complement this rear sight. It all works great and I love the sight picture, and for my aging eyes it is a great help. I highly recommend this sight!
RUN....do not walk....from this sight(04.12.2013)
This sight requires an extra mill cut in addition to standard novak dovetail.Once done,only this model will work without leaving extra cut exposed.Mounted this on a RUGER SR1911.Sight would not lower enough to zero even with .225 front installed.Called Novak,got nowhere.Disassembled sight and found elevation springs were too long and cut three coils off each,now it will lower.Sight notch is narrow,not like factory .145 on ruger.Sight guard horns (antlers) stick up and block target view.
poor quality(19.03.2017)
Mine became a 2 dot sight on day 2 at the range. how does a dot fall out??? Not cleaned before application I guess. tough to adjust low as mentioned before. I regret this purchase.
Not all colts(15.06.2018)
Ordered this as per novak..it will not fit a defender or any slide that is NOT flat on the top side..
Machining is required...
The part that is needed is sold ONLY by novak and you need to order it.
Artikel-Nr.: 625000010 NOVAK Rear Sights, WD fits Colt Herstellerproduktnummer: ALM02765595551503 CNC-gefräste, stählerne, hintere Visierung von Novak mit dem berühmten, flachen Profil und zusätzlicher Vielseitigkeit durch Höhen- und Seitenverstellung. Eine Feststellschraube ermöglicht die seitliche Justierung; die Höhenschraube stoppt sicher und klickt hörbar für eine einfache Feinabstimmung. Die glatten, konturierten Kanten haben eine geringere Chance, hängen zu bleiben oder zu verhaken. Verfügbar für Colt und SW1911 Pistolen.
121.9EUR1121,90 €
*
Lieferzeit ca. 14-21 Tage. 1 Stk. im Großlager
Eigenschaften:Art: 2-Dot, Low-ProfileFarbe der Visierung: WhiteHersteller/Modell: 1911Modell: Government, Commander, Officers
Die CNC-gefräste, stählerne Hintervisierung von Novak bietet ein flaches Profil und ist höhen- und seitenverstellbar.
Die Visierung verfügt über eine Feststellschraube für die seitliche Justierung und eine Höhenschraube für einfache Feinabstimmung mit hörbarem Klick.
Kompatibel mit Colt und SW1911 Pistolen, hat sie glatte, konturierte Kanten, die ein Hängenbleiben verhindern.
Eigenschaften
Art:
2-Dot,Low-Profile
Farbe der Visierung:
White
Hersteller/Modell:
1911
Modell:
Commander,Government,Officers
Versandgewicht: 0,045kgVersandhöhe: 1mmVersandbreite: 83mmVersandlänge: 146mm
Artikeldetails
Made in USA
🔫 Entdecken Sie die NOVAK 1911 Adjustable White Dot Rear Sights für Colt! CNC-gefräst, höhen- und seitenverstellbar für präzises Zielen. Jetzt mehr erfahren!
CNC-machined, steel, rear sight with Novak’s famous, low-profile design and the added versatility of elevation and windage adjustments. Set screw allows drift adjustment for windage; elevation screw positively stops and audibly clicks for easy fine-tuning. Smooth, contoured edges have less chance of catching or snagging. Available in for Colt and SW1911 pistols.
Mehr...
CNC-gefräste, stählerne, hintere Visierung von Novak mit dem berühmten, flachen Profil und zusätzlicher Vielseitigkeit durch Höhen- und Seitenverstellung. Eine Feststellschraube ermöglicht die seitliche Justierung; die Höhenschraube stoppt sicher und klickt hörbar für eine einfache Feinabstimmung. Die glatten, konturierten Kanten haben eine geringere Chance, hängen zu bleiben oder zu verhaken. Verfügbar für Colt und SW1911 Pistolen.
Mehr...
Kundenbewertungen zu NOVAK Rear Sights, WD fits Colt
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 2,8
Very Good Sight(16.10.2012)
I installed this sight on my Colt Combat Elite XSE 1911. It required some hand milling (1/8" wide) on the slide top and a little on the dovetails. It came with excellent instructions and diagrams on how to. I also installed the Novak fiber Optic front sight (662-000-040WD-.190"height) to complement this rear sight. It all works great and I love the sight picture, and for my aging eyes it is a great help. I highly recommend this sight!
RUN....do not walk....from this sight(04.12.2013)
This sight requires an extra mill cut in addition to standard novak dovetail.Once done,only this model will work without leaving extra cut exposed.Mounted this on a RUGER SR1911.Sight would not lower enough to zero even with .225 front installed.Called Novak,got nowhere.Disassembled sight and found elevation springs were too long and cut three coils off each,now it will lower.Sight notch is narrow,not like factory .145 on ruger.Sight guard horns (antlers) stick up and block target view.
poor quality(19.03.2017)
Mine became a 2 dot sight on day 2 at the range. how does a dot fall out??? Not cleaned before application I guess. tough to adjust low as mentioned before. I regret this purchase.
Not all colts(15.06.2018)
Ordered this as per novak..it will not fit a defender or any slide that is NOT flat on the top side..
Machining is required...
The part that is needed is sold ONLY by novak and you need to order it.