This mount is made specifically for the CZ 557 Short Action. Please check your ejection port opening to make sure this mount will correctly fit. The opening measures 2.675"". EGW has had some rifles with longer ejection ports that are short action. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Recommend: 0 MOA -if shooting 0-500 yards 20 MOA -if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Mehr...
Diese Montage ist speziell für die CZ 557 Short Action gefertigt. Bitte überprüfe die Öffnung deines Auswurffensters, um sicherzustellen, dass diese Montage korrekt passt. Die Öffnung misst 2.675"". EGW hat einige Gewehre mit längeren Auswurffenstern, die ebenfalls Short Action sind. Die Picatinny-Kreuzschlitze verlaufen über die gesamte Länge der Schiene, was dem Schützen Flexibilität beim Montieren von Zielfernrohrringen und anderen Zubehörteilen bietet. EGW-Einzelstück-Zielfernrohrmontagen sind die offensichtliche Wahl für Jäger und taktische Schützen. Diese Montage ist eine Picatinny-Stil Basis und kompatibel mit Picatinny oder Weaver Zielfernrohrringen. EGW fertigt diese in ihrer Werkstatt mit einem ihrer Bearbeitungszentren. Nach der Bearbeitung werden die Montagen poliert, sandgestrahlt und Typ III anodisiert, um eine langanhaltende Haltbarkeit zu gewährleisten. Empfohlen: 0 MOA - wenn du auf 0-500 Yards schießt, 20 MOA - wenn du auf 500-1000 Yards schießt. Beim Nullstellen deines Gewehrs mit einer 20 MOA Montage empfiehlt EGW, auf 200 Yards zu nullen. Installation: EGW empfiehlt 20 Zoll-Pfund Drehmoment und einen Tropfen blauen Loctite (Loctite wird separat verkauft). Die gesamte Montage und das Zubehör (von den Montageschrauben und dem Werkzeug bis zur Verpackung) werden in den USA hergestellt.
Mehr...
134.9134.92EUR
Artikel-Nr.: 296000760 EGW CZ 557 SA 1-PIECE PICATINNY BASE 0 MOA Herstellerproduktnummer: 80924841370115723 Diese Montage ist speziell für die CZ 557 Short Action gefertigt. Bitte überprüfe die Öffnung deines Auswurffensters, um sicherzustellen, dass diese Montage korrekt passt. Die Öffnung misst 2.675"". EGW hat einige Gewehre mit längeren Auswurffenstern, die ebenfalls Short Action sind. Die Picatinny-Kreuzschlitze verlaufen über die gesamte Länge der Schiene, was dem Schützen Flexibilität beim Montieren von Zielfernrohrringen und anderen Zubehörteilen bietet. EGW-Einzelstück-Zielfernrohrmontagen sind die offensichtliche Wahl für Jäger und taktische Schützen. Diese Montage ist eine Picatinny-Stil Basis und kompatibel mit Picatinny oder Weaver Zielfernrohrringen. EGW fertigt diese in ihrer Werkstatt mit einem ihrer Bearbeitungszentren. Nach der Bearbeitung werden die Montagen poliert, sandgestrahlt und Typ III anodisiert, um eine langanhaltende Haltbarkeit zu gewährleisten. Empfohlen: 0 MOA - wenn du auf 0-500 Yards schießt, 20 MOA - wenn du auf 500-1000 Yards schießt. Beim Nullstellen deines Gewehrs mit einer 20 MOA Montage empfiehlt EGW, auf 200 Yards zu nullen. Installation: EGW empfiehlt 20 Zoll-Pfund Drehmoment und einen Tropfen blauen Loctite (Loctite wird separat verkauft). Die gesamte Montage und das Zubehör (von den Montageschrauben und dem Werkzeug bis zur Verpackung) werden in den USA hergestellt.
Artikel-Nr.: 296000761 EGW CZ 557 SA 1-PIECE PICATINNY BASE 20 MOA Herstellerproduktnummer: 80926841370115730 Diese Montage ist speziell für die CZ 557 Short Action gefertigt. Bitte überprüfe die Öffnung deines Auswurffensters, um sicherzustellen, dass diese Montage korrekt passt. Die Öffnung misst 2.675"". EGW hat einige Gewehre mit längeren Auswurffenstern, die ebenfalls Short Action sind. Die Picatinny-Kreuzschlitze verlaufen über die gesamte Länge der Schiene, was dem Schützen Flexibilität beim Montieren von Zielfernrohrringen und anderen Zubehörteilen bietet. EGW-Einzelstück-Zielfernrohrmontagen sind die offensichtliche Wahl für Jäger und taktische Schützen. Diese Montage ist eine Picatinny-Stil Basis und kompatibel mit Picatinny oder Weaver Zielfernrohrringen. EGW fertigt diese in ihrer Werkstatt mit einem ihrer Bearbeitungszentren. Nach der Bearbeitung werden die Montagen poliert, sandgestrahlt und Typ III anodisiert, um eine langanhaltende Haltbarkeit zu gewährleisten. Empfohlen: 0 MOA - wenn du auf 0-500 Yards schießt, 20 MOA - wenn du auf 500-1000 Yards schießt. Beim Nullstellen deines Gewehrs mit einer 20 MOA Montage empfiehlt EGW, auf 200 Yards zu nullen. Installation: EGW empfiehlt 20 Zoll-Pfund Drehmoment und einen Tropfen blauen Loctite (Loctite wird separat verkauft). Die gesamte Montage und das Zubehör (von den Montageschrauben und dem Werkzeug bis zur Verpackung) werden in den USA hergestellt.
This mount is made specifically for the CZ 557 Short Action. Please check your ejection port opening to make sure this mount will correctly fit. The opening measures 2.675"". EGW has had some rifles with longer ejection ports that are short action. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Recommend: 0 MOA -if shooting 0-500 yards 20 MOA -if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Mehr...
Diese Montage ist speziell für die CZ 557 Short Action gefertigt. Bitte überprüfe die Öffnung deines Auswurffensters, um sicherzustellen, dass diese Montage korrekt passt. Die Öffnung misst 2.675"". EGW hat einige Gewehre mit längeren Auswurffenstern, die ebenfalls Short Action sind. Die Picatinny-Kreuzschlitze verlaufen über die gesamte Länge der Schiene, was dem Schützen Flexibilität beim Montieren von Zielfernrohrringen und anderen Zubehörteilen bietet. EGW-Einzelstück-Zielfernrohrmontagen sind die offensichtliche Wahl für Jäger und taktische Schützen. Diese Montage ist eine Picatinny-Stil Basis und kompatibel mit Picatinny oder Weaver Zielfernrohrringen. EGW fertigt diese in ihrer Werkstatt mit einem ihrer Bearbeitungszentren. Nach der Bearbeitung werden die Montagen poliert, sandgestrahlt und Typ III anodisiert, um eine langanhaltende Haltbarkeit zu gewährleisten. Empfohlen: 0 MOA - wenn du auf 0-500 Yards schießt, 20 MOA - wenn du auf 500-1000 Yards schießt. Beim Nullstellen deines Gewehrs mit einer 20 MOA Montage empfiehlt EGW, auf 200 Yards zu nullen. Installation: EGW empfiehlt 20 Zoll-Pfund Drehmoment und einen Tropfen blauen Loctite (Loctite wird separat verkauft). Die gesamte Montage und das Zubehör (von den Montageschrauben und dem Werkzeug bis zur Verpackung) werden in den USA hergestellt.