A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail. Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.
SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.
Der UltiMAK M1-B: Die perfekte Lösung für deine AK-47
Der AK SCOUT MOUNT MODE M1-B von ULTIMAK ist eine extrem stabile Plattform für deine hochwertigen Optiken. Mit der zunehmenden Beliebtheit von AK-basierten Gewehren in der 3-Gun-Wettbewerben ist der Bedarf an einem praktischen, leichten und absolut zuverlässigen Hochgeschwindigkeits-Zielfernrohrsystem gestiegen. Der UltiMAK M1-B Optik-Montage ist die Antwort darauf.
Produktbeschreibung
Die Picatinny-Schiene ist gut unter der Achse der Kimme positioniert, was diesen Montage zu der niedrigsten verfügbaren Optikmontage für die AK macht. Mit einem niedrig montierten, tubularen Zielfernrohr kannst du deine Optik ohne einen Wangenauflage verwenden und dennoch deinen gewohnten Halt beibehalten. Das System ermöglicht das Co-Witnessing (die Fähigkeit, deine Kimme direkt durch ein 1x-Zielfernrohr als Backup-Visier zu verwenden), wenn es mit einem tubularen Reflexvisier verwendet wird.
Diese robuste Montage ersetzt das ursprüngliche Stahl-Gastube und die obere Handschutz, sodass sie weniger als eine Unze zum Gewicht des Gewehrs hinzufügt und damit die leichteste Optikmontageinstallation der Welt ist. Die vordere Positionierung der Optik ermöglicht dir schnelleres, einfacheres und natürlicheres Zielen, während dein gesamtes Sichtfeld erhalten bleibt. Mehrere Ziel- oder bewegliche Zielengagements mit beiden offenen Augen werden zur zweiten Natur.
Die UltiMAK AK Optik-Montage muss selten entfernt werden, um das Gewehr zu reinigen, sodass du dir keine Sorgen um den Verlust der Treffpunktlage machen musst. Da die Montage am Lauf befestigt ist und nicht zwischen dem Gasblock und dem Sichtblock wie das ursprüngliche Gastube eingeklemmt wird, haben mehrere UltiMAK-Nutzer eine Verbesserung der inhärenten Genauigkeit ihrer AKs berichtet.
Technische Spezifikationen
- Picatinny/Weaver-Stil Schiene
- Ersetzt das Gastube
- Direkte Befestigung am Lauf für maximale Stabilität, Genauigkeit und optimale Rohrausrichtung
- Kompatibel mit einer Vielzahl von AK-Gewehrvariationen
- Für 7.62 x 39 Kaliber AKs mit Standardgewichtlauf und abnehmbarem Gastube geeignet
- Fertigung aus solidem, einteiligem 6061-T6 hartanodisiertem Aluminium
- Lieferumfang: 4140 Stahlklemmen, Schrauben, Inbusschlüssel und Anleitung
- Keine Waffenbauarbeiten erforderlich
SPECS: 6061-T6 Aluminium, schwarz, matte Oberfläche. 6-7/8" (17.5cm) lang. 6.7 oz. (189 g) Gewicht. Passt auf alle 7.62x39 Kalibergewehre mit originalen Gastuben ohne seitliche Gasportlöcher. Die Installation kann geringfügige Anpassungen am Handschutz erfordern.