Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Mehr...
Material: 7075 Aluminium Beschichtung: Mattschwarzes Hardcoat Gesamtlänge: 1,831" (46,51 mm) Gesamtbreite: 1,062" (26,97 mm) Montagematerial: (2) 8-32 Linsenkopfschrauben, (1) 8-32 Gewindestift Red Dot Kompatibilität: Vortex Razor, C-More RTS & STS Einfach das hintere Visier deiner Waffe entfernen und durch unsere Montage ersetzen, um dein Vortex Razor, C-More RTS oder STS Red-Dot-Visier zu montieren. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial inklusive. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Sight Mount in der Schwalbenschwanzführung Ziehe die Gewindestiftschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW Sight Mount (ein kleines Stück Papier zwischen dem Red-Dot-Visier und der Montage zu legen, erleichtert das spätere Entfernen und verhindert, dass Loctite auf das Red-Dot-Visier gelangt.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs (1,69 Nm) fest
Mehr...
77.977.91EUR
Artikel-Nr.: 296000559 EGW S&W Model 52 Vortex Razor Sight Mount Herstellerproduktnummer: 49464841370117062 Material: 7075 Aluminium Beschichtung: Mattschwarzes Hardcoat Gesamtlänge: 1,831" (46,51 mm) Gesamtbreite: 1,062" (26,97 mm) Montagematerial: (2) 8-32 Linsenkopfschrauben, (1) 8-32 Gewindestift Red Dot Kompatibilität: Vortex Razor, C-More RTS & STS Einfach das hintere Visier deiner Waffe entfernen und durch unsere Montage ersetzen, um dein Vortex Razor, C-More RTS oder STS Red-Dot-Visier zu montieren. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial inklusive. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Sight Mount in der Schwalbenschwanzführung Ziehe die Gewindestiftschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW Sight Mount (ein kleines Stück Papier zwischen dem Red-Dot-Visier und der Montage zu legen, erleichtert das spätere Entfernen und verhindert, dass Loctite auf das Red-Dot-Visier gelangt.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs (1,69 Nm) fest
77.9EUR077,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Eigenschaften:Art: TacticalBasenanzahl: 1-PieceFarbe: BlackHersteller/Modell: Smith & WessonMaterial: AluminumModell: 52
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Mehr...
Material: 7075 Aluminium Beschichtung: Mattschwarzes Hardcoat Gesamtlänge: 1,831" (46,51 mm) Gesamtbreite: 1,062" (26,97 mm) Montagematerial: (2) 8-32 Linsenkopfschrauben, (1) 8-32 Gewindestift Red Dot Kompatibilität: Vortex Razor, C-More RTS & STS Einfach das hintere Visier deiner Waffe entfernen und durch unsere Montage ersetzen, um dein Vortex Razor, C-More RTS oder STS Red-Dot-Visier zu montieren. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial inklusive. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Sight Mount in der Schwalbenschwanzführung Ziehe die Gewindestiftschraube fest (falls zutreffend) Platziere das Red-Dot-Visier auf der EGW Sight Mount (ein kleines Stück Papier zwischen dem Red-Dot-Visier und der Montage zu legen, erleichtert das spätere Entfernen und verhindert, dass Loctite auf das Red-Dot-Visier gelangt.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs (1,69 Nm) fest