Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

EGW
S&W 1911 ADJUSTABLE VORTEX VIPER/VENOM SIGHT MOUNT

841370116959 296000535
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.  
0 0 1 EUR
Artikel-Nr.: 296000535
EGW S&W 1911 Adjustable Vortex Viper/Venom Sight Mount
Herstellerproduktnummer: 49296 841370116959 Material: 7075 Aluminium Beschichtung: Matte Black Hardcoat Gesamtlänge: 1.811" Gesamtbreite: 0,99" Montagezubehör: (2) 6-32 Button Head Schrauben, (2) 6-32 Flachkopfschrauben, (1) 6-32 Gewindestift Red Dot Kompatibilität: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Die Red Dot Visiere von EGW sind dafür vorgesehen, von links nach rechts installiert zu werden (mit dem Lauf nach vorne gerichtet). Die Schwalbenschwanzführung hat eine progressive Verjüngung, um die Installation zu erleichtern. Einfach das hintere Visier deiner Waffe entfernen und durch unsere Montage ersetzen, um dein Vortex Viper/Venom, Burris FastFire oder Docter Red-Dot-Visier zu montieren. Keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagezubehör inbegriffen. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Visiermontage in der Schwalbenschwanzführung Ziehe den Gewindestift fest (falls zutreffend) Platziere das Red Dot Visier auf der EGW Visiermontage (ein kleines Stück Papier zwischen Red Dot Visier und Visiermontage erleichtert die Demontage und hält Loctite vom Red Dot Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs fest 2 Button Head Kapfschrauben - mitgeliefert für Vortex Viper und Venom Visiere 2 Flachkopfschrauben - mitgeliefert für Burris FastFire und Docter Visiere Die mit diesem Montagekit mitgelieferten Schrauben benötigen einen 5/64'' Inbusschlüssel zur Installation.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.
Eigenschaften: Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Smith & Wesson Material: Aluminum Modell: 1911

Eigenschaften

Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Smith & Wesson Material: Aluminum Modell: 1911 Versandgewicht: 0,041kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 127mm

Artikeldetails

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.  
Newsletter