The Sinclair wooden reloading press stand is designed to hold 7/8 inch to fourteen reloading presses for field/range use or for home use when permanent mounting isn't an option. Great for load testing at the range. The stand is constructed of solid birch plywood and reinforced with aluminum angles for structural support. The large footprint provides a stable base when clamped down with a c-clamp. Press stands are shipped completely assembled. Designed to accomodate the following presses: RCBS Rockchucker, Redding Boss and Big Boss, Hornady 007 presses, and similar sized presses. User must mark and drill mounting holes in top plate with normal drill bit. Mounting bolts are not included as we don't know what hole size you need for your press. The mounting plate has a drillable mounting surface of four and one half inch wide by five and one half inch deep.
Mehr...
Der Sinclair Holzladepressenständer ist dafür konzipiert, Ladepressen von 7/8 Zoll bis vierzehn Zoll für den Einsatz im Feld/Bereich oder für den Heimgebrauch zu halten, wenn eine dauerhafte Montage keine Option ist. Ideal für Ladetests im Schießstand. Der Ständer ist aus massivem Birken-Sperrholz gefertigt und mit Aluminiumwinkeln für strukturelle Unterstützung verstärkt. Die große Standfläche sorgt für eine stabile Basis, wenn sie mit einer C-Klemme festgeklemmt wird. Pressenständer werden komplett montiert geliefert. Entwickelt, um die folgenden Pressen aufzunehmen: RCBS Rockchucker, Redding Boss und Big Boss, Hornady 007 Pressen und ähnlich große Pressen. Der Benutzer muss die Montagelöcher in der oberen Platte mit einem normalen Bohrer markieren und bohren. Montagebolzen sind nicht enthalten, da wir nicht wissen, welche Lochgröße Sie für Ihre Presse benötigen. Die Montageplatte hat eine bohrbare Montagefläche von viereinhalb Zoll Breite und fünfeinhalb Zoll Tiefe.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL Sinclair Wooden Press Stand
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4
Maximize bench space(27.07.2011)
This stand maximizes bench space, allowing me to use both rifle and shotgun presses as well as a powder measure on the same tabletop. All of these are mounted on wooden bases. Also, having the press elevated is more comfortable. Extra tall presses can be accommodated by adding additional plywood on top of the stand.
Extreme Reloading (02.05.2015)
I have a Rock Chucker Supreme (RC IV) and it barely fits the stand. There's about 1mm of space left between the press base and the washers. The wooden stand that I received didn't have the hi-gloss finish as pictured, but has a dull sheen. Also, the arm on the press will hit the wooden base before the ram bottom out on the first notch, so you'll have to use the second notch, which tilts the wooden base 45 degrees for awkward reloading.
Artikel-Nr.: 749006972 SINCLAIR INTERNATIONAL Sinclair Wooden Press Stand Der Sinclair Holzladepressenständer ist dafür konzipiert, Ladepressen von 7/8 Zoll bis vierzehn Zoll für den Einsatz im Feld/Bereich oder für den Heimgebrauch zu halten, wenn eine dauerhafte Montage keine Option ist. Ideal für Ladetests im Schießstand. Der Ständer ist aus massivem Birken-Sperrholz gefertigt und mit Aluminiumwinkeln für strukturelle Unterstützung verstärkt. Die große Standfläche sorgt für eine stabile Basis, wenn sie mit einer C-Klemme festgeklemmt wird. Pressenständer werden komplett montiert geliefert. Entwickelt, um die folgenden Pressen aufzunehmen: RCBS Rockchucker, Redding Boss und Big Boss, Hornady 007 Pressen und ähnlich große Pressen. Der Benutzer muss die Montagelöcher in der oberen Platte mit einem normalen Bohrer markieren und bohren. Montagebolzen sind nicht enthalten, da wir nicht wissen, welche Lochgröße Sie für Ihre Presse benötigen. Die Montageplatte hat eine bohrbare Montagefläche von viereinhalb Zoll Breite und fünfeinhalb Zoll Tiefe.
175.9EUR0175,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
The Sinclair wooden reloading press stand is designed to hold 7/8 inch to fourteen reloading presses for field/range use or for home use when permanent mounting isn't an option. Great for load testing at the range. The stand is constructed of solid birch plywood and reinforced with aluminum angles for structural support. The large footprint provides a stable base when clamped down with a c-clamp. Press stands are shipped completely assembled. Designed to accomodate the following presses: RCBS Rockchucker, Redding Boss and Big Boss, Hornady 007 presses, and similar sized presses. User must mark and drill mounting holes in top plate with normal drill bit. Mounting bolts are not included as we don't know what hole size you need for your press. The mounting plate has a drillable mounting surface of four and one half inch wide by five and one half inch deep.
Mehr...
Der Sinclair Holzladepressenständer ist dafür konzipiert, Ladepressen von 7/8 Zoll bis vierzehn Zoll für den Einsatz im Feld/Bereich oder für den Heimgebrauch zu halten, wenn eine dauerhafte Montage keine Option ist. Ideal für Ladetests im Schießstand. Der Ständer ist aus massivem Birken-Sperrholz gefertigt und mit Aluminiumwinkeln für strukturelle Unterstützung verstärkt. Die große Standfläche sorgt für eine stabile Basis, wenn sie mit einer C-Klemme festgeklemmt wird. Pressenständer werden komplett montiert geliefert. Entwickelt, um die folgenden Pressen aufzunehmen: RCBS Rockchucker, Redding Boss und Big Boss, Hornady 007 Pressen und ähnlich große Pressen. Der Benutzer muss die Montagelöcher in der oberen Platte mit einem normalen Bohrer markieren und bohren. Montagebolzen sind nicht enthalten, da wir nicht wissen, welche Lochgröße Sie für Ihre Presse benötigen. Die Montageplatte hat eine bohrbare Montagefläche von viereinhalb Zoll Breite und fünfeinhalb Zoll Tiefe.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL Sinclair Wooden Press Stand
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4
Maximize bench space(27.07.2011)
This stand maximizes bench space, allowing me to use both rifle and shotgun presses as well as a powder measure on the same tabletop. All of these are mounted on wooden bases. Also, having the press elevated is more comfortable. Extra tall presses can be accommodated by adding additional plywood on top of the stand.
Extreme Reloading (02.05.2015)
I have a Rock Chucker Supreme (RC IV) and it barely fits the stand. There's about 1mm of space left between the press base and the washers. The wooden stand that I received didn't have the hi-gloss finish as pictured, but has a dull sheen. Also, the arm on the press will hit the wooden base before the ram bottom out on the first notch, so you'll have to use the second notch, which tilts the wooden base 45 degrees for awkward reloading.