The Lock-N-Load powder measure offers the most flexible operation and the widest range of any powder measure. Go from .5 grain to 265 grains by simply changing rotor and inserts. Use one Lock-N-Load Powder Measure for reloading everything from small pistol cartridges to large magnum rifle cartridges. To change metering inserts, just push the Lock-N-Load insert release button and insert another metering insert. With only .002" clearance between the drum and rotor, it's the tightest in the industry for a standard measure. This tight tolerance helps eliminate powder binding between the frame and drum, delivering smooth function with all types of propellant–extruded or ball. Mount to your bench using a standard mounting bracket and lock ring, or use Hornady's Lock-N-Load bushings to mount this versatile measure on the Fast Load Powder Measure Stand or on the Lock-N-Load AP with case activated powder drop for automatic powder measuring during reloading.
Mehr...
Das Lock-N-Load Pulvermaß bietet die flexibelste Bedienung und den breitesten Anwendungsbereich aller Pulvermaße. Wechsle von 0,5 Grain bis zu 265 Grain einfach durch Austauschen des Rotors und der Einsätze. Verwende ein Lock-N-Load Pulvermaß für das Wiederladen von allem, von kleinen Pistolenpatronen bis hin zu großen Magnum-Gewehrpatronen. Um Messereinsätze zu wechseln, drücke einfach den Lock-N-Load Einsatzfreigabeknopf und setze einen anderen Messereinsatz ein. Mit nur 0,002" Spiel zwischen Trommel und Rotor ist es das engste im Bereich für ein Standardmaß. Diese enge Toleranz hilft, das Binden von Pulver zwischen Rahmen und Trommel zu eliminieren und sorgt für eine reibungslose Funktion mit allen Arten von Treibmittel – extrudiert oder Kugel. Montiere es an deiner Werkbank mit einer Standard-Montagehalterung und Verriegelungsring oder verwende Hornadys Lock-N-Load Buchsen, um dieses vielseitige Maß auf dem Fast Load Pulvermaßständer oder am Lock-N-Load AP mit aktivierter Pulverabgabe für automatisches Pulvermessen während des Wiederladens zu montieren.
Mehr...
Kundenbewertungen zu Hornady Lock-N-Load Powder Measure
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4,5
Very high quality tool(21.06.2016)
Very pleased with the quality of this item, very robust materials and construction. Is very accurate (0.3 gr spread) with spherical powders. Still having difficulty however with flake and extruded powders (0.7 gr spread), although I do not see that the design is to cause as much as the nature of those materials. I will be weighing every charge on those unless I find a technique that improves the consistency. Will be adding the pistol rotor soon and am hoping that will allow small amounts of flake powder to drop better. None of the powders stick or jam, although the extruded powder is frequently cut. My unit came with a powder baffle as well, I did not see that in the descriptions and was pleased to get it. Adjusts pretty quickly but I still throw and weigh a number of charges to make sure that the odd one or two heaviest charges are not over what I want. Absolutely recommend using the Hornady "One-Shot" gun cleaner and lube that Hornady uses in their video to clean and lube before use. Glad I found that cleaner to be available, I think it will work awesome on my firearms as well. Very happy with this purchase.
A hidden gem(27.03.2018)
My first experience with a powder measure was with a Redding 3 BR. It required far too much effort to cut extruded powder and the exterior finish was rough. As I searched for a different measure, I read several reviews and got several recommendations on the Hornady Lock-N-Load Measure, so I took a chance.
I received the measure yesterday and was very pleased with it. The finish is far better than what was on my Redding, the measure is heavy and extremely well-built. Hornady has an excellent video on YouTube that details how to disassemble, degrease, lube and reassemble the measure prior to use. It takes all of 15 minutes and I do suggest you purchase the Hornady One Shot Cleaner/Lube as the video suggests.
After the measure was cleaned and lubed, I loaded the hopper with almost one pound of IMR4064. The Hornady required minimal effort to cut the extruded powder and it wasn't finicky about my technique to throw an accurate charge with a difficult powder.
Artikel-Nr.: 749006896 Hornady Lock-N-Load Powder Measure Herstellerproduktnummer: 050069090255500691 Das Lock-N-Load Pulvermaß bietet die flexibelste Bedienung und den breitesten Anwendungsbereich aller Pulvermaße. Wechsle von 0,5 Grain bis zu 265 Grain einfach durch Austauschen des Rotors und der Einsätze. Verwende ein Lock-N-Load Pulvermaß für das Wiederladen von allem, von kleinen Pistolenpatronen bis hin zu großen Magnum-Gewehrpatronen. Um Messereinsätze zu wechseln, drücke einfach den Lock-N-Load Einsatzfreigabeknopf und setze einen anderen Messereinsatz ein. Mit nur 0,002" Spiel zwischen Trommel und Rotor ist es das engste im Bereich für ein Standardmaß. Diese enge Toleranz hilft, das Binden von Pulver zwischen Rahmen und Trommel zu eliminieren und sorgt für eine reibungslose Funktion mit allen Arten von Treibmittel – extrudiert oder Kugel. Montiere es an deiner Werkbank mit einer Standard-Montagehalterung und Verriegelungsring oder verwende Hornadys Lock-N-Load Buchsen, um dieses vielseitige Maß auf dem Fast Load Pulvermaßständer oder am Lock-N-Load AP mit aktivierter Pulverabgabe für automatisches Pulvermessen während des Wiederladens zu montieren.
137.9EUR13137,90 €
*
Wird nach Ihrer Bestellung beim Lieferanten beschafft Lieferzeit ca. 4-10 Wochen.
The Lock-N-Load powder measure offers the most flexible operation and the widest range of any powder measure. Go from .5 grain to 265 grains by simply changing rotor and inserts. Use one Lock-N-Load Powder Measure for reloading everything from small pistol cartridges to large magnum rifle cartridges. To change metering inserts, just push the Lock-N-Load insert release button and insert another metering insert. With only .002" clearance between the drum and rotor, it's the tightest in the industry for a standard measure. This tight tolerance helps eliminate powder binding between the frame and drum, delivering smooth function with all types of propellant–extruded or ball. Mount to your bench using a standard mounting bracket and lock ring, or use Hornady's Lock-N-Load bushings to mount this versatile measure on the Fast Load Powder Measure Stand or on the Lock-N-Load AP with case activated powder drop for automatic powder measuring during reloading.
Mehr...
Das Lock-N-Load Pulvermaß bietet die flexibelste Bedienung und den breitesten Anwendungsbereich aller Pulvermaße. Wechsle von 0,5 Grain bis zu 265 Grain einfach durch Austauschen des Rotors und der Einsätze. Verwende ein Lock-N-Load Pulvermaß für das Wiederladen von allem, von kleinen Pistolenpatronen bis hin zu großen Magnum-Gewehrpatronen. Um Messereinsätze zu wechseln, drücke einfach den Lock-N-Load Einsatzfreigabeknopf und setze einen anderen Messereinsatz ein. Mit nur 0,002" Spiel zwischen Trommel und Rotor ist es das engste im Bereich für ein Standardmaß. Diese enge Toleranz hilft, das Binden von Pulver zwischen Rahmen und Trommel zu eliminieren und sorgt für eine reibungslose Funktion mit allen Arten von Treibmittel – extrudiert oder Kugel. Montiere es an deiner Werkbank mit einer Standard-Montagehalterung und Verriegelungsring oder verwende Hornadys Lock-N-Load Buchsen, um dieses vielseitige Maß auf dem Fast Load Pulvermaßständer oder am Lock-N-Load AP mit aktivierter Pulverabgabe für automatisches Pulvermessen während des Wiederladens zu montieren.
Mehr...
Kundenbewertungen zu Hornady Lock-N-Load Powder Measure
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4,5
Very high quality tool(21.06.2016)
Very pleased with the quality of this item, very robust materials and construction. Is very accurate (0.3 gr spread) with spherical powders. Still having difficulty however with flake and extruded powders (0.7 gr spread), although I do not see that the design is to cause as much as the nature of those materials. I will be weighing every charge on those unless I find a technique that improves the consistency. Will be adding the pistol rotor soon and am hoping that will allow small amounts of flake powder to drop better. None of the powders stick or jam, although the extruded powder is frequently cut. My unit came with a powder baffle as well, I did not see that in the descriptions and was pleased to get it. Adjusts pretty quickly but I still throw and weigh a number of charges to make sure that the odd one or two heaviest charges are not over what I want. Absolutely recommend using the Hornady "One-Shot" gun cleaner and lube that Hornady uses in their video to clean and lube before use. Glad I found that cleaner to be available, I think it will work awesome on my firearms as well. Very happy with this purchase.
A hidden gem(27.03.2018)
My first experience with a powder measure was with a Redding 3 BR. It required far too much effort to cut extruded powder and the exterior finish was rough. As I searched for a different measure, I read several reviews and got several recommendations on the Hornady Lock-N-Load Measure, so I took a chance.
I received the measure yesterday and was very pleased with it. The finish is far better than what was on my Redding, the measure is heavy and extremely well-built. Hornady has an excellent video on YouTube that details how to disassemble, degrease, lube and reassemble the measure prior to use. It takes all of 15 minutes and I do suggest you purchase the Hornady One Shot Cleaner/Lube as the video suggests.
After the measure was cleaned and lubed, I loaded the hopper with almost one pound of IMR4064. The Hornady required minimal effort to cut the extruded powder and it wasn't finicky about my technique to throw an accurate charge with a difficult powder.