Strike Industries is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock. It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide! We have put many hours and 1000's of rounds down range with most of the more popular red dot optics on the market with no problems whatsoever! This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws. Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady, sturdy and rugged mount that will repeatedly hold zero. Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there. (Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM. Disclaimer- You may mark your slide when using this mount to properly secure the mount. It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation. Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
Entdecke die neueste Innovation für deinen Glock!
Strike Industries freut sich, dir das revolutionäre neue Produkt vorzustellen: die Universal (Optics) Mount für Glock. Diese Halterung bietet die niedrigste Höhe über dem Lauf in der Branche, ohne dass du deinen Schlitten schneiden oder eine teure Nachrüstschiene kaufen musst!
Wir haben viele Stunden und tausende von Schüssen mit den beliebtesten Rotpunkt-Optiken auf dem Markt getestet und dabei keinerlei Probleme festgestellt! Dazu gehören unter anderem:
- Burris Fast Fire II & III
- Leupold Delta Point Reflexvisiere
- Docters II & III
- EoTech MRDS
- Trijicon RMR
- Vortex Venom und Viper
- und viele weitere.
Die Halterung selbst wird über den Dovetail mit 6 Set-Schrauben am Schlitten befestigt. Zwei in der Dovetail-Aussparung und eine vorne sowie hinten davon, dazu zwei weitere, um ein Verrutschen zu verhindern. Dies sorgt für eine stabile, robuste Halterung, die immer wieder die Nullstellung hält.
Im Lieferumfang sind außerdem 6mm, 8mm und 10mm Schrauben (jeweils zwei Stück) enthalten, die verwendet werden, um die meisten gängigen Optiken zu befestigen. (Je nach Optik musst du die passenden Schrauben für dein spezielles Modell finden. Für das Trijicon RMR gibt es zwei spezielle Schrauben.)
Sobald du die GUM an deinem Schlitten befestigt und die richtigen Stützen (zwei Sätze von Verstärkungsstützen sind enthalten) für deine Optik gefunden hast, montiere deine Optik auf die Stütze und sichere sie mit den letzten beiden längeren Schrauben.
Haftungsausschluss: Es kann sein, dass dein Schlitten beim Einsatz dieser Halterung markiert wird, um die Halterung richtig zu sichern. Es wird dringend empfohlen, einen Büchsenmacher mit der Installation der GUM zu beauftragen und die richtigen Werkzeuge zu verwenden. Leupold Delta Point kann montiert werden, jedoch nicht mit verstärkten Stützen, um 100% Sicherheit zu gewährleisten.