Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland

EGW
FN FNS, FNX VORTEX RAZOR SIGHT MOUNT

841370114382 296000701
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: FN FNP (the slide radius is too large to allow this mount to fit) FN 5.7 Any Optics Ready Pistol
76.9 76.9 1 EUR
Artikel-Nr.: 296000701
EGW FN FNS, FNX VORTEX RAZOR SIGHT MOUNT
Herstellerproduktnummer: 49449 841370114382 Entferne einfach das hintere Visier an deiner Waffe und ersetze es durch die EGW Montage, um dein Vortex Razor, C-More RTS oder STS Red-Dot Visier anzubringen. Du kannst die Montage jederzeit abnehmen und dein hinteres Visier wieder anbringen. Montagematerial ist enthalten. Installationsanleitung Entferne das hintere Visier* Installiere die EGW Sight Mount in der Schwalbenschwanzführung Ziehe die Madenschraube fest (falls zutreffend) Platziere das Red-Dot Visier auf der EGW Sight Mount (ein kleines Stück Papier zwischen Red-Dot Visier und Sight Mount erleichtert die Entfernung und hält Loctite vom Red-Dot Visier fern.) Trage blaues Loctite auf die mitgelieferten Montageschrauben auf Ziehe die Montageschrauben mit einem Drehmoment von 15in/lbs fest Die Schrauben, die mit dieser Montage geliefert werden, benötigen einen 5/64'' Inbusschlüssel zur Installation. Diese Montage passt nicht für: FN FNP (der Schlittenradius ist zu groß, damit diese Montage passt) FN 5.7 Jede Optics Ready Pistole
76.9 EUR 1 76,90 € *
Lieferzeit ca. 14-21 Tage.
1 Stk. im Großlager
Eigenschaften: Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: FN Material: Aluminum Modell: FNX, FNS

Eigenschaften

Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: FN Material: Aluminum Modell: FNX,FNS Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm

Artikeldetails

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: FN FNP (the slide radius is too large to allow this mount to fit) FN 5.7 Any Optics Ready Pistol
Newsletter