Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherwerkzeug & Schießsportzubehör Deutschland
100015471
High Tower Armory 90/22 is a compact, maneuverable stock kit for the Ruger® 10/22® which utilizes a bullpup design for superior balance and ergonomics. This incredibly durable, polymer stock will reduce the overall length of most 10/22®’s to about 26 1/2 inches, just over the federally required minimum length for rifles. The HTA 90/22 also features a CNC machined monolithic aluminum Picatinny optics rail and aluminum bedding block, as well as an ambidextrous steel charging handle which cycles the factory 10/22® bolt from forward positions. The HTA 90/22 trigger linkage is made of Melonite treated steel for the most consistent and efficient transfer of energy, having a resistance to flex three times greater than aluminum by weight. A safety extension is included to allow the original factory safety to be activated, in addition to a safety selector located near the trigger. Also included is both an extended magazine and automatic bolt release which replace the factory releases and allow for much faster manipulation of your rifle's controls. This kit comes complete with a removable dummy suppressor, two side mounted Picatinny rails, and a detachable ammunition storage box for holding spare rounds in the field. Accepts factory 10 round magazines as well as most aftermarket high capacity magazines. Fits factory 18 1/2" and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Made in the USA. New models of the 90/22 can be used by left handed shooters, as the kit now includes a detachable shell deflector. PLEASE CHECK THAT YOUR RUGER 10/22 BARREL IS AT LEAST 18” IN LENGTH. MOST 10/22 barrels are long enough to produce a legal length rifle in the 90/22 stock system. However, some 10/22® variants and aftermarket barrels are shorter than 18". Federal law requires rifles to have a minimum overall length of 26”. The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length. You can check your barrel length by removing the barrel from the 10/22® receiver and measuring it from muzzle to breech.

SPECS: Fits - Ruger 10/22 rifles with a 18" barrel.  Construction - Fiber reinforced polymer.  6061 aluminum optics rail and bedding block.  Steel charging handle with melonite finish.  Steel trigger linkage with melonite finish.  Length - 21.5" long without 10/22 installed (not including dummy suppressor).  Overall length - 26.5" with factory 10/22 barrel.  Weight - 3.5 lbs.

454.9 454.9 1 EUR
Artikel-Nr.: 100015471
HIGH TOWER ARMORY Ruger 10/22 Stock Bullpup Polymer BLK
Herstellerproduktnummer: HTA9022BLK Das High Tower Armory 90/22 ist ein kompaktes, handliches Schaft-Kit für das Ruger® 10/22®, das ein Bullpup-Design für überlegene Balance und Ergonomie nutzt. Dieser unglaublich haltbare, aus Polymer gefertigte Schaft reduziert die Gesamtlänge der meisten 10/22® auf etwa 26,5 Zoll, knapp über der bundesweit vorgeschriebenen Mindestlänge für Gewehre. Das HTA 90/22 verfügt auch über eine CNC-gefräste, monolithische Aluminium Picatinny-Optikschienen und einen Aluminium-Bettungsblock, sowie einen beidhändigen Stahl-Ladehebel, der den Werksverschluss des 10/22® aus vorderen Positionen zyklisiert. Die Abzugverbindung des HTA 90/22 ist aus melonitbehandeltem Stahl gefertigt für die konsistenteste und effizienteste Energieübertragung, mit einer Widerstandsfähigkeit gegen Biegen dreimal größer als Aluminium nach Gewicht. Eine Sicherheitserweiterung ist enthalten, um die ursprüngliche Werksicherung zu aktivieren, zusätzlich zu einem Sicherheitswähler in der Nähe des Abzugs. Ebenfalls enthalten sind sowohl eine erweiterte Magazin- als auch automatische Verschlussfreigabe, die die Werksfreigaben ersetzen und eine viel schnellere Manipulation der Steuerungen Ihres Gewehrs ermöglichen. Dieses Kit wird komplett mit einem abnehmbaren Dummy-Schalldämpfer, zwei seitlich montierten Picatinny-Schienen und einer abnehmbaren Munitionsaufbewahrungsbox geliefert, um Ersatzrunden im Feld zu halten. Akzeptiert Werks-10er-Magazine sowie die meisten Aftermarket-Hochkapazitätsmagazine. Passt für Werks-18,5" und .920" Bull-Läufe mit mindestens 18 Zoll Länge (17 1/4 Zoll von der Empfängeroberfläche bis zur Mündung). Hergestellt in den USA. Neue Modelle des 90/22 können von Linkshändern verwendet werden, da das Kit jetzt einen abnehmbaren Patronenabweiser enthält. BITTE ÜBERPRÜFE, DASS DEIN RUGER 10/22 LAUF MINDESTENS 18" LANG IST. Die meisten 10/22 Läufe sind lang genug, um ein legales Längengewehr im 90/22 Schaftsystem zu produzieren. Einige Varianten des 10/22® und Aftermarket-Läufe sind jedoch kürzer als 18". Das Bundesgesetz verlangt eine Mindestgesamtlänge von 26" für Gewehre. Das HTA 90/22 erfordert eine Mindestlaufänge von 18", um die Gesamtlänge von 26" zu erreichen. Du kannst deine Laufänge überprüfen, indem du den Lauf vom 10/22® Empfänger entfernst und ihn von der Mündung bis zum Patronenlager misst.
454.9 EUR 8 454,90 € *
Lieferzeit ca. 14-21 Tage.
8 Stk. im Großlager
Eigenschaften: Art: Bullpup Farbe: Black Hersteller/Modell: Ruger Material: Polymer Modell: 10/22

Eigenschaften

Art: Bullpup Farbe: Black Hersteller/Modell: Ruger Material: Polymer Modell: 10/22 Versandgewicht: 1,837kg Versandhöhe: 86mm Versandbreite: 221mm Versandlänge: 584mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1



High Tower Armory 90/22 is a compact, maneuverable stock kit for the Ruger® 10/22® which utilizes a bullpup design for superior balance and ergonomics. This incredibly durable, polymer stock will reduce the overall length of most 10/22®’s to about 26 1/2 inches, just over the federally required minimum length for rifles. The HTA 90/22 also features a CNC machined monolithic aluminum Picatinny optics rail and aluminum bedding block, as well as an ambidextrous steel charging handle which cycles the factory 10/22® bolt from forward positions. The HTA 90/22 trigger linkage is made of Melonite treated steel for the most consistent and efficient transfer of energy, having a resistance to flex three times greater than aluminum by weight. A safety extension is included to allow the original factory safety to be activated, in addition to a safety selector located near the trigger. Also included is both an extended magazine and automatic bolt release which replace the factory releases and allow for much faster manipulation of your rifle's controls. This kit comes complete with a removable dummy suppressor, two side mounted Picatinny rails, and a detachable ammunition storage box for holding spare rounds in the field. Accepts factory 10 round magazines as well as most aftermarket high capacity magazines. Fits factory 18 1/2" and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Made in the USA. New models of the 90/22 can be used by left handed shooters, as the kit now includes a detachable shell deflector. PLEASE CHECK THAT YOUR RUGER 10/22 BARREL IS AT LEAST 18” IN LENGTH. MOST 10/22 barrels are long enough to produce a legal length rifle in the 90/22 stock system. However, some 10/22® variants and aftermarket barrels are shorter than 18". Federal law requires rifles to have a minimum overall length of 26”. The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length. You can check your barrel length by removing the barrel from the 10/22® receiver and measuring it from muzzle to breech.

SPECS: Fits - Ruger 10/22 rifles with a 18" barrel.  Construction - Fiber reinforced polymer.  6061 aluminum optics rail and bedding block.  Steel charging handle with melonite finish.  Steel trigger linkage with melonite finish.  Length - 21.5" long without 10/22 installed (not including dummy suppressor).  Overall length - 26.5" with factory 10/22 barrel.  Weight - 3.5 lbs.

Newsletter